Rust Inhibitor Rust Remover Derusting Spray Car Maintenance Cleaning 50ml

CRust Inhibitor Rust Remover Derusting Spray Car Maintenance Cleaning 50ML Product Features: Rust chassis changed beyond recognition. The easiest-to-apply, fastest drying rust converter, that would be the Chassis Rust Converter Chassis Rust Converter takes existing rust and transforms it into an inert coating, sealing out moisture and preventing future rust and corrosion. No more scraping, sandblasting or grinding This all-in-one surface conditioner and primer creates a dark, protective polymeric barrier thats weather-proof and ready for a fresh coat of paint for your car's chassis. This Chassis Rust Converter will provides more than twice the rust protection. Direction: Surface preparation: Remove large rust and scale particles with a wire brush or sandpaper. Clean the surface thoroughly to remove dirt, , and grease. Application: Shake or stir well before using. Apply two coats using either a brush, roller or pump sprayer allowing at least 20 minutes drying time between coats. Allow 48 hours of cure time before applying a quality paint. Clean-up: Application equipment should be cleaned immediately with soap and water. General: Do not apply this product if the surface temperatures are below 50F. Store in a cool, dry place, protected from freezing or temperatures above 100F. For long-lasting protection of iron surfaces, the cured rust converter coating should be sealed with two coats of high-quality oil-based paint. No other primer is required. Material: PE Net content: 100g Size6.4cmx5.0cm/2.52''x1.96'' Package included: 1 x Anti-rust lubricant