Remote Control PWM DC Motor Speed Controller 12V 24V 48V Forward Reverse

Function Introduction1. Soft Start Time Setting: Adjustable range 000-100 (0-10 seconds), default value 1 second2. Soft Stop Time Setting: Adjustable range 000-100 (0-10 seconds), default value 1 secondFor Function 3, Function 4 and Function 5, values with more than 3 digits will not display the thousands place, and the thousands place will flash on the setting interface3. Maximum Speed Scale Setting: Adjustable range 000-9990, default value 1004. Speed Lower Limit Setting: Adjustable range 000-9980, default value 05. Speed Upper Limit Setting: Adjustable range 000-9980, default value 1006. Speed Adjustment Increment Setting: Adjustable values include 001, 002, 005, 010, 015, 020, 025, 050, 100. Each press of the increase or decrease button adjusts the speed by the selected increment7. Power-on Start Mode: Mode 1: Motor does not start when powered on; Mode 2: Motor starts automatically when powered on. Default mode is Mode 18. Total Running Time Setting: Adjustable range 0~99:59:59. Setting to all 0 disables timing function. Default value is 0For Function 9, Function 0 and Function A, long press the setting button for 2 seconds to switch between hour, minute and second units9. Forward Rotation Time Setting: Adjustable range 0~99:59:59, default value 10 seconds10. Stop Time Setting: Adjustable range 0~99:59:59, default value 10 seconds11. Reverse Rotation Time Setting: Adjustable range 0~99:59:59, default value 10 seconds12. Manual/Automatic Mode Selection: Mode 1: Manual mode, Function 8, 9, 10, 11 are disabled; Mode 2: Automatic mode, Function 8, 9, 10, 11 are enabledParametersInput voltage: DC 6-55VMaximum current: 20ADisplay method: LCD color screenRotation direction: BidirectionalSpeed regulation method: Button and knobWireless remote control: YesSupported load: compatible with DC brushless motorInstallation method: EmbeddedWiring type: Fence type terminalProduct net weight: 95g + 25gProduct dimensions: 77mm width × 57mm height × 38mm thicknessOpening dimensions: 72mm width × 52mm heightMaterial: PlasticWiring InstructionsInput voltage must be within DC 6-55V, and the specific voltage must match the rated voltage of the connected motorInput power positive terminalPower negative terminalMotor positive terminalMotor negative terminalRemote Control PairingLong press the setting button, then power on the device, then press any key on the remote control once. The backlight flashes twice to indicate successful pairingFactory ResetEnter the setting interface, press and hold the setting button for 6 seconds. The backlight flashes twice to indicate successful restoration to factory settingsAppearance may vary between different product batches, which does not affect normal usePackage Contents1 × Speed Controller1 × Remote control