DC 12V One way One For Four Wireless Remote Control System Switch Access Control Switch

Features: Superheterodyne acceptance module, the radio is stable, the remote control distance and sensitivity are not affected by the climatic environment and other factors, which is impossible for other products that accept the circuit. Digital coding, using imported digital IC chips for encoding, will not interfere with each other, and will not be affected by external obstacles. Easy to install, just need to connect our remote control switch to the light fixture or small appliance, you can realize remote control, no need to code. Remote control by wall, wireless remote control can be carried out by partition wall. Intelligent learning, power on, red indicator light, press the learning button, the learning indicator lights, press any button on the remote control, the learning indicator flashes, the relay emits an action sound, and the learning is completed. Specification: Product Name: 12V single way one for four wireless remote control switch Product model: CJY-1201C one for four Product weight: 147 g / 5.18 oz Receiver size: approx. 5 * 3.5 * 2 cm / 1.96 * 1.37 * 0.78 in Type: one for four wireless remote control switch Working voltage: DC12V Working frequency: 433.92MHz Total load power: 800W / road Remote control distance: 100 meters Working temperature: -15 - 75 (°C) Working mode: Jog, interlock, self-locking, delay 5 seconds, 10 seconds, 15 seconds, 20 seconds Coding method: learning type Modulation method: ASK Functional Description: Controlling the opening/closing of electromechanical equipment and household appliances Package list: 1 * Remote Control 4 * Controller Learning the code: 1. Jog learning method: Press the control board code pair button once, the LED indicator flashes once, and when the LED indicator lights up, press the remote control button that needs to be coded. The LED of the control panel flashes continuously for 3 times. 2. Self-locking learning method: Press the control board code button twice in succession. The LED indicator flashes twice. When the LED indicator lights up, press the remote control button that needs to be coded. The LED of the control panel flashes continuously for 3 times. 3. Interlocking learning method: Press the control board code button three times in succession. The LED indicator flashes 3 times. When the LED indicator lights up, press the remote control button that needs to be coded. The LED of the control panel flashes continuously for 3 times. 4. Delay 5 seconds learning method: Press the control board code button 4 times in succession. The LED indicator flashes 4 times. When the LED indicator lights up, press the remote control button that needs to be coded. The LED of the control panel flashes continuously for 3 times. 5. Delay 10 seconds learning method: Press the control board code button 5 times in succession. The LED indicator flashes 5 times. When the LED indicator lights up, press the remote control button that needs to be coded. The LED of the control panel flashes continuously for 3 times. 6. Delay 15 seconds learning method: Press the control board code button 6 times in succession. The LED indicator flashes 6 times. When the LED indicator lights up, press the remote control button that needs to be coded. The LED of the control panel flashes continuously for 3 times. 7. Delay 20 seconds learning method: Press the control board code button 7 times in succession. The LED indicator flashes 7 times. When the LED indicator lights up, press the remote control button that needs to be coded. The LED of the control panel flashes continuously for 3 times. Precautions: 1. Do not operate with power. Turn off the power to operate, and use it after the test is confirmed to be correct. 2. When the voltage of the remote control is insufficient, please change the battery in time (the remote control distance becomes closer when the remote control battery voltage is insufficient). 3. When using wireless electronic products, care should be taken to avoid metal masks, large electronic devices, electromagnetic fields, etc., which have strong interference sources, to avoid remote control and short receiving distance or to work normally. 4. Do not use this electronic product abnormally. Abnormal use will reduce the performance and longevity of the product. In severe cases, damage to the product will also bring hidden dangers to your safety.