3D lamp football Xj.

Color: White3D football lamp with crack decal, giving the impression that the object has broken through the wall How to install your 3D crack decal 1. Unfold the decal and flatten the creases.2. Place the decal in the desired location, place tape (painter's tape or similar) at the edge of the top of the decal and mark arrows on the tape and decal as a placement reference.3. Carefully remove the back of the decal.4. Align the arrows and carefully stick the top of the decal (top 1-2 inches) to the wall, making sure to keep the bottom part away from the wall.5. Use a credit card or smooth surface to slowly attach the decal, pressing against the paper backing and removing any air bubbles that may occur, remembering to keep the bottom part of the decal away from the wall as you work your way down, out and towards the edges until you reach the end.6. Very slowly pull the paper away from the wall, making sure that the (fine edges) are firmly attached to the wall. If any part of the decal comes off with the paper, simply put it back against the wall and press firmly with a credit card until the decal sticks to the wall. 7. Drill a hole in the spaces marked with an X and insert the wall plug provided. Insert the screws provided about halfway and place the lamp on the screws. 8. Enjoy How to remove your 3D crack decal without damaging the wallWarning Decal removal should only be done by an adult. 1 Remove the screws from the wall before removing the crack decal.2 Use a regular hair dryer and set the heat to the highest setting.3 Apply heat to the decal evenly by holding the hair dryer 1-2 inches from the wall.4 Be sure to heat the entire surface before attempting to remove the decal.5 Once you have heated the entire decal, start removing the decal from the top and slowly pull it away from the wall in a downward motion.6 Place the hair dryer above the decal as you pull it off to help loosen the adhesive.7 For best results, do not rush this process. Take your time and remove the decal gently, piece by piece, applying heat as needed.8 If there is any adhesive residue left on the wall, use a cloth with warm soapy water to remove it.9 Enjoy your crack decal-free wall!\"