1、This product has high sensitivity and high accuracy, and strong anti-overload ability. 2、Strong anti‑interference ability, highly integrated sensor and amplifier circuit, long‑term stable and reliable. 3、Made of die‑cast aluminum alloy, the 0 point and accuracy of the circuit board do not need to be adjusted. 4、Using unique stress isolation technology, after precise temperature compensation and high stability amplification processing, the signal of the measured medium is converted into a 4-20mA output signal. 5、With strict quality control and quality assurance, high safety factor, can be used with peace of mind. 1 x Wind Pressure Transmitter Item Type: Wind Pressure TransmitterMaterial: Aluminum alloyMeasuring Medium: Non-corrosive gasOverload Capacity: Single-ended minimum withstand voltage 4Kpa, maximum withstand voltage can not exceed 25 times the rangeMeasurement Accuracy: 0.2%FSOutput Signal: 4~20mAPower Supply: DC24VWire Length: Approx. 50cm / 19.7inPagoda Mouth Diameter: Approx. 8mm / 0.3inTemperature Drift: ± 0.1%FS/℃Ambient Temperature: -30℃~+80℃Environmental Humidity: ≤85%RHApplicable Environment: Widely used in pressure measurement in clean rooms, boilers, dust collectors, vacuum cleaners, power plants, air conditioners, etc.Size: Approx. 60mm / 2.4in51mm / 2in45mm / 1.8in20mm / 0.8in64mm / 2.5in4mm / 0.2in40mm / 1.6in35mm / 1.4in30mm / 1.2in10mm / 0.4in 1.5mm / 0.1in