Item Type: Sink Drain <br>Material: Brass, Stainless Steel <br>Color: Antique <br>Process Treatment: Electroplating <br>Drain Hole Diameter: Approx. 3cm / 1.2in <br>Form: British Sewer <br>Type: Flap Type <br>Weight: Approx. 237g / 8.4oz <br>Size: Approx. 19x6cm / 7.5x2.4in <br> <br> <br>Installation <br>1. Take out the head of the drainer first, and gently put it into the sink drain hole <br>2. After leveling and volume, as shown in the figure above <br>3. Then put the ring pad at the bottom, screw on the fixing nut, and tighten it with a wrench <br>4. After fixing the drainer as shown above, the drain installation is complete, just connect the upper and lower water pipes<br>1、The drain plug is made of brass, and the tail pipe uses stainless steel material, which is durable. <br>2、The polished brass finish has good gloss and can resist daily scratches and corrosion. <br>3、Non?overflow drainage components are widely used in bathroom and kitchen wash basins. <br>4、With hardware and soft silicone gasket, please make sure the gasket is in the correct position to avoid leakage. <br>5、Wash basin sink drainer, easy to install and can keep the drainage smooth and avoid blockage.1.Please allow 0?1 inch error due to manual measurement. Thanks for your understanding. <br>2.Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.<p>1 x Sink Drain</p><p>1 x Protective Cover</p>