XR17V358 Pro Integrates Eight Enhanced 16550UARTs, 1 General-Purpose 16-Bit Timer/Counter And 16 Multi-Function I/O () Function. Each Uart Channel Has Its Own 16550 Uart Compatible Configuration Register For Individual Channel Control, Status And Data Transfer. The Device Configuration Registers Include A Set Of Four Consecutive Interrupt Source Registers That Provide Interrupt Status For All Eight Uarts, Timer/Counters, , And Sleep Wake Indicators. In Addition, Each Uart Channel Has 256- Transmit And Receive , Automatic / Or Dtr/ Hardware Flow Control, Automatic Xon/Xoff, Special Character Flow Control, Programmable Transmit And Receive Trigger Levels, Infrared Encoder/Decoder (Irda Version 1.1), And A Programmable Fractional Baud Rate Generator With A Prescaler Divided By 1 Or 4, And 4x Sampling Rate Is 25 Mbps Data Rate. Description: Material: PCB Color as shown Function Single 3.3V power supply Internal buck regulator for 1.2V core PCIe 2.0 compliant, x1 link, dual simplex, 2.5Gbps each direction Support x1/x4/x8/x16 card slot bus interface EEPROM interface configuration, data read and write burst operations Global interrupt status register for all eight UARTs Serial data rates up to 25 Mbps 16 multi-function inputs/outputs (MPIOs), 6-bit general-purpose timer/counter Sleep mode with indicator light Eight UART channels via: 16550 compatible register set 256- TX and RX Programmable TX and RX trigger levels Fractional baud rate generator Automatic / or DTR/ hardware flow control with programmable hysteresis Automatic Xon/Xoff software flow control -485 half-duplex direction control output with programmable turnaround delay Multipoint automatic address detection Infrared (IrDA 1.1) data encoder/decoder Package Contents: 1 x PCI-E XR17V358 PRO 8S Multi-Serial I/O Card 1 x DB9 Terminal Cable 1 x CD Driver 1 x Short Iron Piece Note: Different Batches May Have Differences In Product Appearance, Color, And Printed Characters, Which Will Not Affect The Use Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.