A maintenance unit for compressed air equipment that ensures dry, clean, and pressure-regulated air. When installed in a compressor, or as a switch in compressed air lines, attached to compressed air equipment such as paint guns and airbrushes, the compressed air that passes through will be purged of dirt and condensate thanks to a fine-fiber filter. As a result, air quality will improve significantly and tool life will be extended. The pressure can be adjusted manually by turning the top wheel. No more pressure fluctuations. The maximum pressure is 10 bars. The water separator collects the water contained in the compressed air. The separator housing is made of aluminum. The purges collect in a transparent bell filter, so you can control the quantity. You can empty the bell by pressing the valve. The integrated oil mist lubricator is adjustable and ensures that the air is enriched with the necessary amount of oil to lubricate the parts of the pressure reducer. On the back of this maintenance unit, there is a bracket with holes for wall mounting, if desired. Ideal for professionals! Reference 51362 Number of packages 1 Connections 12.91 mm / 1/4 Inches Max. pressure 10 bar Tool Type Pressure regulator Weight [kg] 0.8660 Package: Height in mm 80 Package: Length in mm 220 Package: Width in mm 120