Description The emulator of an immobilizer for motorcycles and scooters For Yama-ha. Works with all motorcycles and scooters For Yamaha from 2006 to 2009. Does not demand programmingonly need is connect wires. Completely emulates work of a regular immobilizer, including light-emitting diode work on the instrument panel. Description: For emulator installation in the case of a regular immobilizer: 1. Remove glue hermetic from the immobilizer case. 2. Take out a PCB from immobilizer and desolder from it wires. 3. Connect the emulator according to drawing more low. 4. Insert the emulator into the immobilizer case. Specification: Black (2 pcs.) GND Red with a green strip BATT (+12v) Red with a white strip IGN (+12v) Blue LED (+5v) Yellow with a blue strip K-line Immo-ECU Note: Installation guide not included, we strongly recommend you seek professional installation. Please check as much as possible to make sure the item is what you need. Tips: The product may be updated constantly ,Due To Different Batches, The Actual Product May Have Slight Differences Or Color Differences, Which Does Not Affect Use Colour:As Shown Material:PCB Package Contents: 1 * Immobilizer Emulator for Yamaha Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.