Standard 2 Relay Output Function DIN Rail Thermostat with Sensor NO NC COMMON -40~110°C DIN Thermostat with sensor, High/Low Temperature 2 Alarm Relay NO NC COMMON Output 7A/250VAC, AC90~260V Features: - Strong anti-interference ability, stable performance, simple circuit and high precision; the outer shell adopts a DIN rail casing, which is easy to install and has a sleek appearance. - Includes adjustment function and digital filtering. - Standard 2 relay output, contact capacity 7A/250VAC. Specifications: - Power supply: AC90~260V, power consumption less than 2W (other voltages available on request) - Measurement accuracy: ±0.5% FS - Measurement range: -40~110°C - Display: 0.36 inch high brightness red LED (other colors available on request) - Operating environment: -10~60°C (relative humidity below 80%) - Dimensions: 110 x 36 x 60 mm - Sensor cable length: 1.5m Package included: - 1 x DIN Rail Thermostat - 1 x Temperature Sensor Code Table: - TY1: Relay 1 output alarm type 0: Upper limit alarm – Relay closes when temperature reaches AL1, opens when temperature drops below (AL1-HY1) 1: Lower limit alarm – Relay closes when temperature drops to AL1, opens when temperature rises above (AL1+HY1) 2: Upper and lower limit alarm – Relay closes at AL1 and opens at HY1 - AL1: Relay 1 set point: -40.0~130.0°C - HY1: Relay 1 hysteresis: 0.1~130.0°C - TY2: Relay 2 output alarm type 0: Upper limit alarm – Relay closes when temperature reaches AL2, opens when temperature drops below (AL2-HY2) 1: Lower limit alarm – Relay closes when temperature drops to AL2, opens when temperature rises above (AL2+HY2) 2: Upper and lower limit alarm – Relay closes at AL2 and opens at HY2 - AL2: Relay 2 set point: -40.0~130.0°C - HY2: Relay 2 hysteresis: 0.1~130.0°C - SEC: Relay action delay time: 0–999 seconds Delay starts when AL1 or AL2 condition is met; no delay if set to 0 - LC: Temperature correction value: -20.0~20.0°C Displayed value = Measured value + LC