Speed Enhancer Controller for Electric Scooters 1S/Pro, Max Speed 38km/H and Adjustable Down Speed to 20km/H

409,00 DKK
+ 100,49 DKK Levering

Speed Enhancer Controller for Electric Scooters 1S/Pro, Max Speed 38km/H and Adjustable Down Speed to 20km/H

  • Brand: Unbranded
Sоlgt af:

Speed Enhancer Controller for Electric Scooters 1S/Pro, Max Speed 38km/H and Adjustable Down Speed to 20km/H

  • Brand: Unbranded
RRP: 724,00 DKK
Pris: 409,00 DKK
Du sparer: 315,00 DKK (43%)
Sоlgt af:
409,00 DKK
+ 100,49 DKK Levering

På lager

Vi accepterer følgende betalingsmetoder

Beskrivelse

Supported Models: Compatible with 1S, Pro, Pro 2. For M365 scooters, installation requires replacing the Bluetooth board with our version and upgrading to a higher-performance motor. Attention A. Verify your scooter model is 1S/Pro/Pro 2 and confirm it is an original unit. Copies or modified models may not be compatible. To use this controller, replace the Bluetooth board and controller with our components. B. This product modifies the scooter's software settings to increase speed. If your original motor is 250W, performance gains may be limited, as motor power restricts top speed. Achieving speeds up to 38km/h may require upgrading to a 350W or higher motor. C. This product is intended for private use only. Modifications may affect local regulations compliance, potentially invalidate insurance, and alter controller software. The manufacturer and seller assume no liability for risks, damages, or injuries. Use at your own risk. Speed Settings: 1. Low Speed Mode – Up to 20km/h (factory default). 2. High Speed Mode – Up to 38km/h. Installation Steps: 1. Turn off the scooter. 2. Remove the four screws located under the display on the stem. Keep screws for reassembly. 3. Open the housing to access the display and connected wiring. Locate the middle connector and disconnect it. 4. Insert the speed controller between the display and wire, ensuring proper alignment to avoid damaging internal pins. 5. Place the controller inside the stem compartment and reattach the four screws. 6. Press and hold the Bluetooth board power button to turn on the scooter. 7. Rapidly activate the brake three times, then the throttle three times. The display will show "38", indicating firmware update in progress. Do not operate the scooter during this process. Wait until the display shows "0", indicating completion. Turn off the scooter, restart, and test the updated speed function. Color: Black Material: Plastic Package Contents: 1 x Scooter Speed Controller Note: Lighting and screen differences may cause slight color variations. Measurement tolerance: ±1–3 cm.
  • Brand: Unbranded
  • Kategori: Løbehjul
  • Køn: unisex
  • Aldersgruppe: adult
  • Farve: Black
  • Fruugo ID: 414902137-876290364
  • EAN: 6248807666928

Produktsikkerhedsinformation

Se venligst produktsikkerhedsoplysningerne, der er specifikke for dette produkt, beskrevet nedenfor

Følgende oplysninger leveres af den uafhængige tredjepartsforhandler, der sælger dette produkt.

Sikkerhedsadvarsler: Must be used under the guardianship of adults

Levering og returnering

Sendt inden for 2 dage

  • STANDARD: 100,49 DKK - Levering mellem kl fre. 24 oktober 2025–man. 03 november 2025

Afsendes fra Kina.

Vi gør vores bedste for at sikre, at de produkter, du bestiller, leveres til dig fuldt ud og i henhold til dine specifikationer. Skulle du dog modtage en ufuldstændig ordre eller andre ting end dem, du bestilte, eller der er en anden grund til, at du ikke er tilfreds med ordren, kan du returnere ordren eller produkter inkluderet i ordren og modtage en fuld refusion for varerne. Se fuld returpolitik

Detaljer om produktoverholdelse

Se venligst overensstemmelsesoplysningerne, der er specifikke for dette produkt, beskrevet nedenfor.

Følgende oplysninger leveres af den uafhængige tredjepartsforhandler, der sælger dette produkt.

Producent:
De følgende oplysninger angiver kontaktoplysningerne for producenten af det relevante produkt, der sælges på Fruugo.

  • Lin Jianya
  • Shanghai Lujiaqi Supply Chain Co., Ltd.
  • Xinzai Industrial Zone, No. 4, 106, Xinhehui Road Heping Town, Chaoyang District
  • Shantou
  • CN
  • 515154
  • uilttq35656@126.com
  • 18929631935

Ansvarlig person i EU:
De følgende oplysninger angiver kontaktoplysningerne for den ansvarlige person i EU. Den ansvarlige person er den udpegede økonomiske aktør med hovedsæde i EU, der er ansvarlig for overensstemmelsesobligationerne i forbindelse med det relevante produkt, der sælges til den Europæiske Union.

  • Van Lavazza
  • Y & H S.R.L.
  • Via Gravina 21 MT matera,Trani,Puglia
  • Trani
  • Italy
  • 75100
  • itlyhsrl@gmail.com
  • 0039 3917722149