Voltage Amplifier Module Small Signal Instrumentation Transmitter Microvolt/Millivolt AD620

89,00 DKK
GRATIS Levering

Voltage Amplifier Module Small Signal Instrumentation Transmitter Microvolt/Millivolt AD620

  • Brand: Unbranded
Sоlgt af:

Voltage Amplifier Module Small Signal Instrumentation Transmitter Microvolt/Millivolt AD620

  • Brand: Unbranded

89,00 DKK

Spar 30,00 DKK (25%)

Vejl. Pris

119,00 DKK
På lager
GRATIS Levering
Sоlgt af:

89,00 DKK

Spar 30,00 DKK (25%)

Vejl. Pris

119,00 DKK
På lager
GRATIS Levering

Vi accepterer følgende betalingsmetoder

Beskrivelse

Feature: 1. The input range is wide. This product uses AD620 to amplify, which can amplify microvolts and millivolts. Possess higher amplification accuracy and better linearity than the LM358 on the market, and the maximum voltage output range is ±9V 2. A potentiometer is used to amplify the input signal, the magnification is up to 1000 times, and can be adjusted only through a potentiometer 3. The zero point can be adjusted by the zero‑adjusting potentiometer to improve the accuracy, and there will be no zero‑point drift to meet customer needs 4. The module uses 7660A negative pressure chip to output negative pressure (-Vin), which can be provided to customers to drive other dual power loads 5. Mini type, size is 32 x 22mm, there are 4 3mm positioning holes evenly distributed around, 2.54mm standard spacing on both sides Specification: Item Type: Voltage Amplifier ModuleMaterial: Resin Model: AD620 Input Voltage: DC 3-11V Magnification: 1.5-1000 Times adjustable, zero point adjustable Common Mode Rejection Ratio: 100dB Input Bias Current: 1.0nA (maximum) Negative Pressure Output: Greater than -Vin. Due to the output internal resistance of the negative pressure chip, the actual output is greater than -Vin, and the greater the load power, the greater the negative pressure drop Size: Approx. 32 x 22mm / 1.3 x 0.9in Positioning Holes: Approx. 3mm / 0.12in Standard Spacing: Approx. 2.54mm / 0.1in. Package List: 1 x Voltage Amplifier Module2 x Pin Header Note: +S: Signal input terminal, ‑S: Signal input negative terminal(can be connected to GND), Vout signal output, V‑ output a voltage of ‑Vin (for sensor power supply). Signal input, signal output, power input, the 3 signals must share the ground.
  • Fruugo ID: 413587784-874070448
  • EAN: 7603816460346

Produktsikkerhedsinformation

Se venligst produktsikkerhedsoplysningerne, der er specifikke for dette produkt, beskrevet nedenfor

Følgende oplysninger leveres af den uafhængige tredjepartsforhandler, der sælger dette produkt.

Produktsikkerhedsmærker

CE Mark
Sikkerhedsadvarsler: Warning: Please read the product instructions carefully before use to ensure correct use.
Serienummer: 7603816460346

Levering og returnering

Sendt inden for 2 dage

  • STANDARD: GRATIS - Levering mellem kl man. 03 november 2025–man. 10 november 2025 - GRATIS

Afsendes fra Kina.

Vi gør vores bedste for at sikre, at de produkter, du bestiller, leveres til dig fuldt ud og i henhold til dine specifikationer. Skulle du dog modtage en ufuldstændig ordre eller andre ting end dem, du bestilte, eller der er en anden grund til, at du ikke er tilfreds med ordren, kan du returnere ordren eller produkter inkluderet i ordren og modtage en fuld refusion for varerne. Se fuld returpolitik

Detaljer om produktoverholdelse

Se venligst overensstemmelsesoplysningerne, der er specifikke for dette produkt, beskrevet nedenfor.

Følgende oplysninger leveres af den uafhængige tredjepartsforhandler, der sælger dette produkt.

Producent:
De følgende oplysninger angiver kontaktoplysningerne for producenten af det relevante produkt, der sælges på Fruugo.

  • Wuhan Jinxingkai Network Technology Co., Ltd.
  • Wuhan Jinxingkai Network Technology Co., Ltd.
  • No. 1-1, Door 57
  • Shihua Village
  • Qingshan District
  • Wuhan
  • CN
  • 430000
  • goldxinks@163.com
  • 0086 17786498762
  • https://shop01473o1711614.1688.com/page/creditdetail.htm?spm=a261y.7663282.shopNavigation.1.6310755czE9SFQ

Ansvarlig person i EU:
De følgende oplysninger angiver kontaktoplysningerne for den ansvarlige person i EU. Den ansvarlige person er den udpegede økonomiske aktør med hovedsæde i EU, der er ansvarlig for overensstemmelsesobligationerne i forbindelse med det relevante produkt, der sælges til den Europæiske Union.

  • None
  • Kequ Technology s.r.o.
  • Pražákova 1008/69
  • Štýřice
  • Jihomoravský kraj
  • Brno
  • CZ
  • 63900
  • christopher25106@outlook.com
  • 420608214795