Mode selection by DIP switch: To choose between pure light control or light control with timing, open the shell and set the DIP switch to the desired discharge mode. This provides the flexibility to use the unit in the way that suits your installation. Two operation options for flexible control: Pure light control: When the system is configured for this mode, it operates based on ambient light conditions without a timing function. Light control with timing: This mode adds a timing option to your light control, suitable for applications that require a set duration of operation. Clear electrical status indicators: Battery connection check: Connect the battery first. If the battery light is on, the battery connection is correct. Solar panel connection check: Connect the wires to the solar panel. If the connections are correct, the Charge light will turn on or flash within about 10 seconds after the unit is exposed to sunlight. Simple setup steps: 1) Open the shell and set the DIP switch to select the discharge mode (pure light control or light control with timing). 2) Connect the battery first; verify that the battery light comes on to confirm a correct connection. 3) Connect the wires to the solar panel; verify by observing the Charge light after sun exposure. 4) If the Charge light does not turn on, recheck the connections to ensure proper wiring. Practical benefits: Flexible operation modes allow adaptation to different lighting needs without changing hardware. Visual indicators provide quick, onsite confirmation of correct wiring and operation. Simple, stepbystep setup minimizes installation time and reduces setup errors. Suitable applications (23 scenarios): Garden and pathway lighting: Configure for pure light control to automatically illuminate paths in low light conditions. Outdoor signs and displays: Use the timing option to ensure signage lights operate for a planned duration after sunset. Remote sheds or cabins: Rely on the solarpowered control to manage lighting with reliable battery and solar panel verification during setup. Key attributes at a glance: Function: Two selectable discharge modes via DIP switch for flexible light control. Compatibility: Designed to connect with standard battery and solar panel wiring as described; indicators confirm proper connections. Performance indicators: Battery light confirms battery connection; Charge light confirms solar input status after sun exposure. Maintenance: Simple wiring checks and status indicators help with quick troubleshooting.