Introduction: Temperature and Pressure Safety Valves (T/P Valves) 0.7 MPa = 102 PSI Detailed introduction: Temperature and pressure relief valves are suitable for use with various water heaters, including solar, electric, heat pump, and boiler systems. The valve automatically releases excess temperature and pressure, providing dual safety protection for pressurized water heating systems. Features: Safety relief valves are commonly used to regulate pressure in heating system boilers, domestic hot water storage tanks, and general water systems. When the preset pressure is reached, the valve opens to release pressure into the atmosphere, preventing dangerous overpressure conditions that could damage system components. Calibration pressure options: 0.1, 0.15, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, 1.0 MPa Pressure deviation: ±0.015 MPa for pressures up to 0.5 MPa; ±3% of rated pressure for pressures above 0.5 MPa Technical specifications: Color: Gold Material: - Body: 3/4 inch brass - Control spindle: Brass - Sealing gasket: Silicone gel - Spring: SUS304 stainless steel Nominal pressure: PN10 Temperature range: 5–110°C Set pressure options: 0.5, 0.6, 0.7, 0.8, 0.9, 1.0 MPa Set pressure deviation: -10% to +5% of set pressure Set temperature: 99°C Inlet and outlet (middle): BSPP 3/4" x 3/4" Weight: 238 g Dimensions: 83 x 42 mm Package included: 1 x Pressure Valve Note: Lighting effects and display settings may cause slight variations between the color shown in images and the actual product. Measurement error allowance: ±1–3 cm.