Feature 1No Lubrication Required: The pneumatic turbine vibrator requires no lubrication, only clean air. The vibrator uses very little compressed air in relation to the force they provide. 2OMT CNC Machining: The pneumatic turbine vibrator uses the OMT CNC machining process to keep the vibrator within 2 microns of tolerance, high accuracy for high life. 3High Vibration Force: The vibration force of this pneumatic turbine vibrator can be adjusted according to the air pressure, it can be started and stopped immediately, it is fast, high vibration force and safe. 4Low Noise: The pneumatic turbine vibrator has an eccentric copper counterweight installed in the gears, air is charged into the air inlet hole to impact the gears to generate thrust to make the gears rotate, the centrifugal force of the eccentric counterweight generates vibration when rotating, the gears are driven by bearings, low noise. 5Wide Application: This pneumatic turbine vibrator can be used for material conveying, vibratory screening, funnel vibration, helping to fill packaging, foundry sand mould vibration, etc. .wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }Item Type: Pneumatic Turbine VibratorMaterial: Aluminium alloy Model K10 Number of vibrations per minute 0.2MPa 22.5 0.4MPa 27.25 0.6MPa 34.1 Vibration force (N) 0.2MPa 245 0.4MPa 465 0.6MPa 700 Air consumption/min 0.2MPa 90 0.4MPa 150 0.6MPa 190 Package List1 x Pneumatic Turbine Vibrator1 xConnector1 x Muffler