Features: 100MHz bandwidth. 1GS/s sample rate. Time base range: 2ns/div~100s/div. 3.5ns rise time. 2 channels. 7.0-inch high resolution LCD display. Support for SCPI and LabVIEW. Specifications: Functions & Specifications of SDS1102 Bandwidth 100MHz Sample Rate 1GS/s Horizontal Scale(s/div) 2ns/div - 100s/div, step by 1-2-5 Rise Time (at input, typical) ≤3.5ns Channel 2 Display 7" color LCD, 800 × 480 pixels Input Impedance 1M ± 2%, in parallel with 20pF ± 5pF Channel Isolation 50Hz:100:1, 10MHz:40:1 Max Input Voltage 400V (PK-PK) (DC+AC, PK-PK) DC Gain Accuracy ±3% Record Length 10k DC Accuracy (average) Average≥16: ±(3% reading+0.05div) for V Probe Attenuation Factor 1X, 10X, 100X, 1000X LF Respond (AC, -3dB) ≥10Hz (at input, AC coupling, -3dB) Sample Rate / Relay Time Accuracy ±100ppm Interpolation sin (x) / x Interval(T) Accuracy (full bandwidth) Single: ±(1 interval time + 100ppm × reading + 0.6ns), Average16: ±(1 interval time + 100ppm × reading + 0.4ns) Input Coupling DC, AC, and GND Vertical Resolution (A/D) 8 bits (2 channels simultaneously ) Vertical Sensitivity 5mV/div - 5V/div (at input) Trigger Type Edge, Video Trigger Mode Auto, Normal, and Single Trigger Level ±5 divisions from screen center Line / Field Frequency (video) NTSC, PAL and SECAM standard Cursor Measurement V, and T between cursors Automatic Measurement Vpp, Vavg, RMS, Frequency ,Period, Vmax, Vmin, Vtop, Vbase, Width, Overshoot, Pre-shoot, Rise time, Fall time, +Width, -Width, +Duty, -Duty, Delay A→B , Delay A→B Waveform Math +, -, &t