The MT6826S is a member of the fourth-generation magnetic angle encoder IC family. It utilizes anisotropic magnetoresistive () technology and proprietary signal processing techniques to achieve 0° to 360° angle measurement. The chip consists of a pair of for Wheatstone bridges and a signal processing ASIC circuit. As the magnetic field parallel to the chip rotates, the chip can output angular signals such as ABZ, UVW, and PWM. To overcome the loss caused by magnets and installation, MT6826S provides. A simple client self calibration function that can achieve an angle accuracy of Less than ± 0.07 ° after calibration is completed. The MT6826S chip is suitable for various application scenarios with high-speed and high- control requirements, such as closed circuits Loop stepper motor. 1. Based on technology, provide absolute angle measurement from 0 ° to 360 ° 2. Working voltage: 3.3-5.0V 3. Working temperature -40 ° C-125 ° C 4. The system delay is as low as 2US and can support speeds up to 120000 revolutions per minute 5. Incremental output ABZ supports 1 ^ 1024 lines of arbitrary resolution 6. Incremental output UVW supports any polarity from 1 to 16 7. Applications: Industrial sewing machines, closed-loop stepper motors Color: Black Material: PCB Package Contents: 1 x Magnetic encoder 1 x Magnet 3 x pin Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.