Description DC MOTOR DRIVER: The DRV8871 device is a brushed DC motor driver for printers, equipment, industrial equipment, and other small machines. H-BRIDGE DRIVER: Two digital inputs control the H-bridge driver. driver consists of four N-channel MOSFETs, which can control the motor in both directions with a peak current of up to 3.6 A. CURRENT DECOMPOSITION MODE: By selecting the decay mode of the current, the input can be pulse width modulated (PWM) to control the speed of the motor. ADVANCED CURRENT REGULATION CIRCUIT: The DRV8871 device has an advanced current regulation circuit, which does not use analog reference voltage or external sense resistor. LOW POWER RESISTORS: This new solution uses standard low cost, low power resistors to set the current threshold. Specification: Condition: 100% Brand New Item Type: CC Motor Driver Material: Metal Color: BlackH-Bridge Motor Driver - Drives one motor to direct current, a winding of a stepper motor or other loads Wide operating voltage from 6.5 V to 45 V RDS type 565 m (activated) (HS + LS) 3.6 A maximum current drive PWM control interface Current regulation without sense resistor Low power standby mode Small packaging and size: - HSOP 8-pin with PowerPAD - 4.9 6 mm / 0.19 x 0.24 inch Integrated protection functions: - VM undervoltage lockout (UVLO) - Protection against overcurrents (OCP) - Thermal shutdown (TSD) - Automatic fault recovery applications: Printers Appliances and industrial equipment Other mechatronic applications Package List: 1 x m driver DC motor