Manual High Pressure Air Pump Portable Inflator with Pressure Gauge for Oxygen Cylinder Diving

1.099,00 DKK
GRATIS Levering

Manual High Pressure Air Pump Portable Inflator with Pressure Gauge for Oxygen Cylinder Diving

  • Brand: Unbranded
Sоlgt af:

Manual High Pressure Air Pump Portable Inflator with Pressure Gauge for Oxygen Cylinder Diving

  • Brand: Unbranded

1.099,00 DKK

Spar 350,00 DKK (24%)

Vejl. Pris

1.449,00 DKK
På lager
GRATIS Levering
Sоlgt af:

1.099,00 DKK

Spar 350,00 DKK (24%)

Vejl. Pris

1.449,00 DKK
På lager
GRATIS Levering

Vi accepterer følgende betalingsmetoder

Beskrivelse

Features:Made of high quality stainless steel, anti-rust and durable. High pressure air pump by hand, 53cm/20.9in length air pump tube. Simple to operate, making diving become easy, no need to carry large scuba.With a pressure gauge on it, you can know when to stop inflating. Portable and practical, essential accessory for diving. Specification:Material: Stainless SteelColor: Shown as picturesAir Tube Length: Approx. 53cm / 20.9inConnector Diameter: 3.1cm / 1.2inConnector Length: 9cm / 3.5inWeight: Approx. 2840gPackage List:1 * High Pressure Air Pump (with Connector and Air Tube)1 * Wrench(Size: 14.8 * 5 * 0.25cm / 5.8 * 2.0 * 0.1in)2 * Packages of Accessories1 * ManualNote:1. High-pressure air pump, in the process of air inflating due to up and down friction, resulting in fever, this phenomenon is normal.2. The phenomenon of oxygen cylinder respirator can't be inflated: firstly, when oxygen cylinder respirator is delivered, it does not contain gas, secondly, check the high-pressure pump before inflating the high-pressure pump, assemble it according to the instructions, install the gasket rubber ring, tighten the exhaust valve, and then inflate it. This product is different from oxygen pumps such as basketball, volleyball. Effectively, please be patient to inflating for two or three minutes before the pressure gauge will change. It takes three men to inflating about 16 minutes for each oxygen cylinder to fill up. Within 3000PSI, it is within the normal range. Over 3000PSI may burst (please don't inflating too full).3. Oxygen cylinder head and body should be checked for tightness, good connection and not standing above the oxygen cylinder when inflating. Be careful not to inflate the oxygen cylinder to a certain pressure. Oxygen has certain impact. Please pay attention to safety.4. When the pumpis finished, please notice that it is dangerous to twist the exhaust valve of the high-pressure pump and suddenly pull out the connecting port between the pump and the oxygen cylinder.5. Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering..
  • Fruugo ID: 416656014-879131033
  • EAN: 7540131903014

Produktsikkerhedsinformation

Se venligst produktsikkerhedsoplysningerne, der er specifikke for dette produkt, beskrevet nedenfor

Følgende oplysninger leveres af den uafhængige tredjepartsforhandler, der sælger dette produkt.

Produktsikkerhedsmærker

CE Mark
Sikkerhedsadvarsler: Warning: Please read the product instructions carefully before use to ensure correct use.
Serienummer: 7540131903014

Levering og returnering

Sendt inden for 2 dage

  • STANDARD: GRATIS - Levering mellem kl man. 03 november 2025–man. 10 november 2025 - GRATIS

Afsendes fra Kina.

Vi gør vores bedste for at sikre, at de produkter, du bestiller, leveres til dig fuldt ud og i henhold til dine specifikationer. Skulle du dog modtage en ufuldstændig ordre eller andre ting end dem, du bestilte, eller der er en anden grund til, at du ikke er tilfreds med ordren, kan du returnere ordren eller produkter inkluderet i ordren og modtage en fuld refusion for varerne. Se fuld returpolitik

Detaljer om produktoverholdelse

Se venligst overensstemmelsesoplysningerne, der er specifikke for dette produkt, beskrevet nedenfor.

Følgende oplysninger leveres af den uafhængige tredjepartsforhandler, der sælger dette produkt.

Producent:
De følgende oplysninger angiver kontaktoplysningerne for producenten af det relevante produkt, der sælges på Fruugo.

  • Wuhan Pinsheng Technology Co., Ltd.
  • Wuhan Pinsheng Technology Co., Ltd.
  • No.A357,Shoulder-to-shoulder?Incubator,Building?4
  • Wuchang District
  • Wuhan
  • CN
  • 430000
  • pinsenkj@163.com
  • 18062524796
  • https://shop01473o1711614.1688.com/page/creditdetail.htm?spm=a261y.7663282.shopNavigation.1.6310755czE9SFQ

Ansvarlig person i EU:
De følgende oplysninger angiver kontaktoplysningerne for den ansvarlige person i EU. Den ansvarlige person er den udpegede økonomiske aktør med hovedsæde i EU, der er ansvarlig for overensstemmelsesobligationerne i forbindelse med det relevante produkt, der sælges til den Europæiske Union.

  • None
  • Kequ Technology s.r.o.
  • Pražákova 1008/69
  • Štýřice
  • Jihomoravský kraj
  • Brno
  • CZ
  • 63900
  • christopher25106@outlook.com
  • 420608214795