1. Functional Features With the popularization of USB3.2, an increasing number of computer cases are equipped with TYPE - E or 19 - pin front USB interfaces and place them at the front of the case. Nevertheless, older motherboards do not support USB3.2 and lack TYPE - E or 19 - pin interfaces. You can convert the PCI - E signal into a USB3.2 GEN1 19 - pin interface or TYPE - E interface via the M2 slot on the motherboard. In this way, you can connect the 19 - pin or TYPE - E interface on the panel to the expansion card, thereby providing a front ultra - high - speed USB3.2 interface, which is quite convenient. The main control chip uses a USB chip, the third - generation product D720202 from Renesas (NEC). This is one of the expansion cards on the market that can support the LINUX system. When in use, you need to insert the power interface. The expansion card uses inductors and capacitors, which helps ensure the stability of USB power supply. 2. Hardware Requirements A motherboard or laptop that supports M2 KEY - M NVME is needed. This product is a PCI - E or NVME expansion card. Do not insert it into the M2 Sata slot. 3. Specification Parameters 1. Optional types: 19 - pin / TYPE - E 2. Complies with the PCI - Express2.0 standard 3. Complies with the USB3.0 SuperSpeed1.0 standard 4. Complies with the xHCI specification version 1.0 5. Main control chip: Renesas uPD720202 chipset 6. The maximum transmission rate can reach up to 5Gbps, much higher than the 480Mbps of USB2.0, up to around 10 times as much 7. Backward compatible with USB2.0, USB1.1, and USB1.0 8. Transmission rates: 5000/480/12/1.5Mbps 9. Built - in small 4 - pin enhanced power interface 10. Supports USB hot - plug function 11. Supports Windows XP/2003/Vista/win7/win8/2003/MAC 10.8 or higher versions of the system 4. Precautions Due to lighting effects and shooting angles, there may be some minor tolerances in the product. Please understand. Due to manual measurement, an error of 0 - 1cm is acceptable. 5. Package Contents 1 M2 NVME adapter card