Before use, check compatibility between the SSD, the motherboard, and the device interfaces to ensure correct operation. These M.2 adapters support only specific interface conversions and do not support NVMe or PCIe protocols. NGFF to MSATA male adapter: includes four mounting holes to accommodate 2230mm, 2242mm, 2260mm, and 2280mm SSDs. MSATA to NGFF adapter: external interface is M.2 NGFF, internal interface is MSATA; does not support NVMe or PCIe protocols. NGFF to MSATA adapter card: external interface is MSATA, internal interface is M.2 NGFF; also without NVMe or PCIe support. Function: bridges between MSATA and M.2 NGFF SATAbased interfaces, enabling use of drives across different form factors. Compatibility: designed for SATAbased setups; not compatible with NVMe or PCIe drives or protocols. Size and mounting: supports common SSD lengths (2230, 2242, 2260, 2280) where applicable, with mounting holes for secure installation. Performance: provides SATAbased compatibility only; no NVMe/PCIe performance characteristics. Use scenarios: Scenario 1: Reuse an MSATA SSD in a device that provides an M.2 NGFF SATA slot, by using the NGFF to MSATA adapter. Scenario 2: Install an M.2 NGFF SATA SSD in a system that has an MSATA slot, via the MSATA to NGFF adapter. Scenario 3: Deploy in compact or embedded builds where swapping between MSATA and M.2 NGFF is required, such as miniature PCs or dedicated hardware with mixed interface support. Notes: Ensure your application requires SATAbased operation only; NVMe/PCIe support is not available with these adapters.