Warm tips: This fan balancing kit is compatible with most ceiling fans. Function: The plastic balancing clip helps locate problem areas, and the adhesive 5g weights assist in reducing wobble. The permanent weights are secured with a strong adhesive to ensure they stay in place. Working principle: According to physics, when the fan rotates, the thinner the air resistance area, the less resistance occurs, which improves airflow and helps the weight adhere effectively to the fan blade. Advantages: This fan blade balance kit resolves swing issues caused by irregular blades or blade holders. It helps prevent ceiling fan wear, reduces noise, and supports fan blades and components to extend service life. Using Steps: 1. Turn the fan on and set the speed control to the setting where wobble is most noticeable. 2. Turn off the fan and wait for it to stop completely. Select one blade and place the balance clip on the trailing edge, halfway between the blade holder and the tip. 3. Turn the fan on. Observe if the wobble increases or decreases. Turn off the fan, move the clip to another blade, and repeat the test. Continue testing on all blades, noting which blade shows the greatest improvement. 4. Return the clip to the blade with the best result. Slide the clip inward and outward along the blade to find the optimal position for maximum improvement. 5. Remove the clip and attach a balancing weight to the top of the blade along the centerline, near the position where the clip was most effective. 6. If wobble persists, further adjustments can be made using the balancing clip and additional weights. Color: Black, Silver Material: Plastic, Metal Package Contents: 4 sets x Ceiling fan balancing kit (includes 4 plastic balancing clips and 8 adhesive 5g metal weights) Note: Light and display differences may cause slight color variations between the image and the actual item. Measurement error is +/- 1-3 cm.