LM2596 DC 4.0 - 40 to 1.3-37V LED Voltmeter Buck Step-down Power Transducer Module M06 dropship

199,00 DKK
+ 58,99 DKK Levering

LM2596 DC 4.0 - 40 to 1.3-37V LED Voltmeter Buck Step-down Power Transducer Module M06 dropship

  • Brand: Unbranded

LM2596 DC 4.0 - 40 to 1.3-37V LED Voltmeter Buck Step-down Power Transducer Module M06 dropship

  • Brand: Unbranded
RRP: 249,00 DKK
Pris: 199,00 DKK
Du sparer: 50,00 DKK (20%)
Sоlgt af:
199,00 DKK
+ 58,99 DKK Levering

På lager

Vi accepterer følgende betalingsmetoder

Beskrivelse

Input Voltage Range: 4-40VDC Output Voltage Range: 1.25-37DC Adjustable Output Current: 2A Voltmeter Range: 0 to 40V, +-0.1V Error Input Reverse Polarity Protection Built-in Short Output Protection Function Built-in Thermal Shutdown Function L x W x H = 6.1x3.4x12cm (Approx.) LED Digital Voltmeter Tube, Accuracy is Adjustable Function, Can Be Directed At Your Multimeter Adjustable Accurate Press Right Key, so that the display shows the input or output voltage. When the right led light "OUT" shows the output, the left led input "in" shows Quantity: 1PC How to adjust the accuracy? Output voltage calibration steps Step 1, set the right button to "OUT" with LED backlight, the voltmeter shows the output voltage value; Press the right button for more than 2 seconds, release, the voltmeter and the "OUT" LED flash in synchronization, so you can enter the output voltage calibration mode. Step 2, press the right button (normal speed), the voltage value sums up the unit; Press the left button, minus the unit; Due to the unit is less than 0.1V, the minimum voltage indicator is 0.1V, so you need to keep pressing 1-5 times to see the voltmeter change 0.1V, How many times the voltmeter changes 0.1V by pressing the key, depending on the current display voltage, the higher the voltage, the lower the number of presses. Step 3, press the right button for more than 2 seconds, release to exit the output voltage calibration mode. All parameters set to auto shut off to save. Input voltage calibration steps Step 1, set the right button to "IN" with LED backlight, the voltmeter shows the input voltage value; Press the right button for more than 2 seconds, release, the voltmeter and the "IN" LED flash in synchronization, so you can enter the input voltage calibration mode. Steps 2 and 3, according to the output voltage calibration method. Note Some customers report: "the module cannot be adjusted, the output voltage is always equal to the input voltage." When you encounter this problem, turn the potentiometer counterclockwise 10 laps or more, and then adjust the output voltage. Because the factory default output voltage is 20V. Package Included: 1 x LM2596 DC 4.0-40 to 1.3-37V LED Voltmeter Buck Step-down Power Converter Module
  • Fruugo ID: 397931844-848438110
  • EAN: 6935170112397

Levering og returnering

Sendt inden for 5 dage

  • STANDARD: 58,99 DKK - Levering mellem kl man. 06 oktober 2025–man. 20 oktober 2025

Afsendes fra Holland.

Vi gør vores bedste for at sikre, at de produkter, du bestiller, leveres til dig fuldt ud og i henhold til dine specifikationer. Skulle du dog modtage en ufuldstændig ordre eller andre ting end dem, du bestilte, eller der er en anden grund til, at du ikke er tilfreds med ordren, kan du returnere ordren eller produkter inkluderet i ordren og modtage en fuld refusion for varerne. Se fuld returpolitik

Detaljer om produktoverholdelse

Se venligst overensstemmelsesoplysningerne, der er specifikke for dette produkt, beskrevet nedenfor.

Følgende oplysninger leveres af den uafhængige tredjepartsforhandler, der sælger dette produkt.

Producent:
De følgende oplysninger angiver kontaktoplysningerne for producenten af det relevante produkt, der sælges på Fruugo.

  • Zion Creative B.V
  • Zion Creative B.V
  • Herengracht 449A R13
  • Amsterdam
  • Netherlands
  • 1017BR
  • zioncreative01@outlook.com

Ansvarlig person i EU:
De følgende oplysninger angiver kontaktoplysningerne for den ansvarlige person i EU. Den ansvarlige person er den udpegede økonomiske aktør med hovedsæde i EU, der er ansvarlig for overensstemmelsesobligationerne i forbindelse med det relevante produkt, der sælges til den Europæiske Union.

  • VAT SPEED SL
  • VAT SPEED SL
  • Calle Antonio Salvador N99.1
  • Madrid
  • Spain
  • 28026
  • services@vatspeed-eu.com