Small Metal Tube Induction Switch Sensor Pir Infrared Human Body Induction Mini Type 180 Wide Angle Description: The human body sensor adopts pyroelectric infrared technology, built-in human body infrared sensor module, light effect sensor module, and delay switch module. Adopt industrial district-level chips, with large load capacity and strong anti-interference ability. .When a person enters the sensing range, it can be automatically turned on, and after a person leaves, it can be automatically turned off after a delay. This eliminates the artificial waste of conventional lamps that are turned on or turned off by no , prolongs the service life of the lamps, and integrates energy saving, convenience and environmental protection. .It can automatically identify and night, and the external environment illuminance at the beginning of work can be freely selected, so that it can work automatically at night and turn off during the day. Users can adjust by themselves; .The detection distance is adjustable and can be adjusted according to the place of use; .The light on time is adjustable, which can be adjusted by the user according to local conditions. Detection range: 180 Detection distance: maximum 12m (25) Working voltage: AC85V-240V (various voltages can be customized) Working temperature: 10 ~ +40 Working humidity: less than 93% RH Delay time: 5 seconds ~ 6 minutes (adjustable) Environmental illumination: 2 ~ 2000LUX (adjustable) Installation height: 1.8m ~ 2.5m Material quality: ABS Installation method: open type, (opening 10mm) when installing, the adjusting button faces downwards. Wiring instructions: N-blue (connect to the neutral line) L-brown (connected to live wire) Output-Red (Sensor output line) Blue and brown input power Blue and red connect to the load (lamps). Specifications: adjust 1) LUX Is to regulate or night work. A: When adjusted to the sun position, the sensor works all day; B: When the position of the moon is adjusted, the sensor does not work during the day, and automatically enters the working state at night. 2) TIME It is to adjust the delay time of the sensor (52sec~61min) Delay time refers to the time the sensor to turn off after the sensor h