This controller is designed for small gasoline generator sets, providing stop, monitoring, and fault detection functions, as well as parameter setting. It features a dot matrix LCD screen that displays faults while automatically stopping the generator if normal operation cannot be maintained. The interface supports English, with additional languages available upon request. All parameters can be configured using the front panel buttons or via a programmable USB interface connected to a PC. It is suitable for various automatic control systems in generator sets. Parameters: Operating Voltage: DC 8-36V continuous Power Consumption: - Standby: 24V, max 1W - Working: 24V, max 2W AC Voltage Input: 1P2W (L-N input), 30VAC–360VAC (ph-N) Speed Sensor Frequency: 50–9000Hz Generator Frequency Input: 50/60Hz Maximum Accumulated Running Time: 9999.9 hours (minimum time resolution: 6 minutes) Fuel Relay Output: 1A DC positive supply voltage Relay Output: 1A DC positive supply voltage Programmable Relay Output 1: 1A DC positive supply voltage Programmable Relay Output 2: 1A non-contact, normally open output Programmable Relay Output 3: 1A non-contact, normally open output Digital Input: Compatible when connected to battery Insulation Strength: AC 1.5kV applied between high and low voltage terminals; leakage current not exceeding 3mA within 1 minute Operating Temperature: -25°C to +65°C Storage Temperature: -40°C to +85°C Protection Level: IP54 (when waterproof rubber gasket is installed between controller and panel) Dimensions: 106mm x 86mm x 45mm Panel Cutout: 78mm x 66mm Weight: 0.25kg Color: Black Material: ABS Package Includes: 1 x Generator Controller Note: The package includes only the items listed above. Other accessories are not included. Note: Lighting and display differences may cause slight variations in color representation. Measurement error allowed: +/- 1-3cm.