Item Type: Lidar Range Finder Sensor_x000D_ Material: ABS + Printed Circuit Board_x000D_ Function: Assist focusing, elevator projection, intrusion detection, material level measurement. _x000D_ Measuring Range: Approx. 0.2 ~ 8metre / 0.7 ~ 26.2ft (at 90% reflectivity)_x000D_ Accuracy: Approx. 6cm / 2.4in at0.2 ~ 3metre / 0.7 ~ 9.8ft2% at3 ~ 8m / 9.8 ~ 26.2ft_x000D_ Distance Resolution: Approx. 1cm / 0.4in_x000D_ Frame Rate: 100Hz_x000D_ Anti-Ambient Light Ability: 70Klx_x000D_ Working Temperature: -10~60_x000D_ Light Source: VCSEL_x000D_ Centre Wavelength: 850nm_x000D_ Eye Safety: Class1 (IEC60825)_x000D_ Field of View: 2 Degree_x000D_ Power Supply Voltage: 5V0.1V_x000D_ Average Current: 70mA_x000D_ Power Consumption: 0.35W_x000D_ Peak Current: 150mA_x000D_ Communication Level: LVTTL (3.3V)_x000D_ Communication Interface: UART / I2C_x000D_ Size: Approx. 35 x 21.25 x 13.5mm / 1.4 x 0.8 x 0.5in_x000D_ Storage Temperature: -20~75 1A single?point ranging radar based on the ToF principle, using 850nm infrared light source, ensures stable, accurate and highly sensitive distance measurement. 2Has multiple built?in adaptation algorithms for various application environments and targets, and opens a variety of adjustable configurations and parameters. 3Guarantees excellent ranging performance in complex environments and meet the needs of customers in complex application scenarios, efficient and practical. 4Can be flexibly applied in varied cirmustances, including but not limited to assist focusing, elevator projection, intrusion detection, material level measurement, etc. 5Enables a wide measuring range from 0.2 metre to 8 metre, compatible with for Pixhawk and for Raspberry Pi, and has UART/I2C communication interface as well. 1 x Lidar Range Finder Sensor 1 x Connecting Cable The module has UART and I2C interface, UART is the default, if you need to use I2C interface, please set it yourself.