<p>1. Feature-rich, easy to program for beginners or not.</p> <p>2. Maximum 40 channels can be controlled.</p> <p>3. Supports 5 CHASE effects, each effect can be up to 50 single steps.</p> <p>4. With power failure memory, power on automatically enter the mode of operation before power failure; When the fixture address setting is aligned to 8CH, it can realize the function of lifting the lamp; Battery-powered, easy to use, no need to search for the fixtures.</p> <p>5. Battery-powered, easy to use, eliminating the need to search for 220V, and compatible with TYPE-C port, which is the common charging method for cell phones.</p> <p>Buttons with luminous prompts, the operation status is clear at a glance.</p> <p>Power input: 90-240V 50-60HZ</p> <p>TYPE-C plug: 5V-2A</p> <p>Rated power: 10W</p> <p>Capacity: 2600mAh</p> <p>Battery life: 6 hours</p> <p>Charging time: 2 hours</p> <p>Programming Process Introduction:</p> <p>1. In the idle state, press and hold the CHASE button to enter programming mode.</p> <p>2. All 5 keys in the light selection area light up.</p> <p>3. Select the corresponding press to indicate the CHASE number to be programmed.</p> <p>4. The single-step editing state is entered.</p> <p>5. Push the fader to set the single-step scene effect, similar to the manual mode operation.</p> <p>6. Press UP to save and move to the next step edit.</p> <p>7. Repeat step 5.</p> <p>8. After editing all the steps, press MANUAL to exit the programming state and finish saving.</p> <p>Colour:Black</p> <p>Material:plastic</p> <p>Package Contents:</p> <p>1 x Console</p> <p>1 x Charging cable</p> <p>Only the above package content, other products are not included.</p> <p>Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +\/- 1-3cm.</p>