Beskrivelse
Item Type: Spot Welder Control Board
<br>Product Model: DHJ 02B
<br>Working Voltage: 6.5-16V
<br>Working Current: <20mA
<br>Standby Power Consumption: <0.5ma
<br>Recommended Operating Temperature: -10-60℃
<br>Welding Peak Current: 1800A Maximum
<br>Smart Sleep: Automatic sleep after 8 minutes of inactivity
<br>Welding Mode: Default automatic welding mode
<br>Welded Nickel Sheet Thickness: 0.1-0.25mm (related to battery discharge energy)
<br>Common Power Supply: High rate lithium battery, high rate lithium iron phosphate and other lithium batteries
<br>
<br>
<br>More Working Power:
<br>1. 12V 30-65Ah battery has good performance and small internal resistance (internal resistance is less than 10 milliohms)
<br>m, the discharge current is greater than 100A). Such as 12V car starting battery.
<br>2. 4000mah-10000mah, 30-70C, 2S 3S 4S model aircraft lithium
<br>Battery (4S battery needs less than 16V).
<br>3. 30-35Ah capacity type 18650 battery pack.
<br>4. Battery discharge current <900A, short-circuit current <1800A, beyond this range may be damaged control board.
<br>5. Small capacity 18650 battery and DC power supplies cannot be used as power sources. it must have
<br>A high rate lithium battery pack or car starter battery discharge capacity > 100A!
<br>Common Working Power:
<br>30Ah-35Ah capacity type 18650 battery pack
<br>12V car starting power supply
<br>2S 3S 4S Model Aircraft Lithium Battery Pack
<br>3S high rate lithium battery pack
<br>For Hitachi 40900 3S battery pack
<br>12-14.6V acid battery<br>1、For Spot Welder: The intelligent spot welder control board supports spot welding of 0.1?0.3mm nickel sheets throughout the process, saving time and effort.
<br>2、Intelligent Chip: Using intelligent logic control chip to intelligently calculate battery power, the control board has stable performance and safer operation.
<br>3、Multiple Functions: Supports the magnification gear, capacity gear, and 6 gear power selection, with low and over power warning function (forbidding welding).
<br>4、Current Range: The spot welder control board adopts 6 original MOS tubes, the maximum stable current is 1800A, with 100A?900A wide welding current range.
<br>5、Welding Mode: The default automatic welding mode, automatic sleep for 8 minutes without operation, the control module is safe to operate, has strong practicability.1. After powering on, the default power on indicator light is on. At this time, welding cannot be performed. It is necessary to select functions such as capacity, magnification and gear at the same time, and then the welding output can be normal.
<br>2. Find the brocade, place the brocade on the positive and negative poles of the battery to be welded, the 2 welding pen tips are as close as possible, touch the brocade lightly, and automatically output instantaneous pulse welding brocade after 0.5 seconds; the buzzer beeps after each output After the device beeps, the spot welding pen needs to be removed, otherwise the second output cannot be performed (the purpose is to prevent the battery from being damaged due to too long welding time).
<br>3. When the low power indicator is on, it means that the battery power is too low, and the welding effect may not be very good.<div>2 x Cables</div><div>2 x Spot Welder Pens</div><div>1 x Control Board</div><div>1 x Nickel Belt</div><div>4 x Screws</div><div>4 x Nuts</div><div>2 x Heat Shrinkable Tubes</div><div>1 x User Manual</div>
-
Brand:
Unbranded
-
Kategori:
Svejsepistoler
-
Højde:
5
-
Vægt:
0.5
-
Længde:
5
-
Width:
5
-
Fruugo ID:
351662814-766233846
-
EAN:
8283223067902
Levering og returnering
Sendes inden for 24 timer
Afsendes fra Kina.
Vi gør vores bedste for at sikre, at de produkter, du bestiller, leveres til dig fuldt ud og i henhold til dine specifikationer. Skulle du dog modtage en ufuldstændig ordre eller andre ting end dem, du bestilte, eller der er en anden grund til, at du ikke er tilfreds med ordren, kan du returnere ordren eller produkter inkluderet i ordren og modtage en fuld refusion for varerne. Se fuld returpolitik
Detaljer om produktoverholdelse
Se venligst overensstemmelsesoplysningerne, der er specifikke for dette produkt, beskrevet nedenfor.
Følgende oplysninger leveres af den uafhængige tredjepartsforhandler, der sælger dette produkt.
Producent:
De følgende oplysninger angiver kontaktoplysningerne for producenten af det relevante produkt, der sælges på Fruugo.
- Shenzhenyuandedianziyuouxiangongsi
- Shenzhenyuandedianziyuouxiangongsi
- Room 903, Building B, Nanxian Commercial Plaza, Nanyuan New Village
- Hongshan Community, Minzhi Subdistrict, Longhua District
- Longhua
- Shenzhen
- China
- 518500
- szrhkj21@163.com
- 15819859068
Ansvarlig person i EU:
De følgende oplysninger angiver kontaktoplysningerne for den ansvarlige person i EU. Den ansvarlige person er den udpegede økonomiske aktør med hovedsæde i EU, der er ansvarlig for overensstemmelsesobligationerne i forbindelse med det relevante produkt, der sælges til den Europæiske Union.
- Huang Pengliang
- FORCHAIN GmbH
- Vilbeler Landstra?e73 60388 Frankfurt am Main
- Frankfurt am Main
- Frankfurt am Main
- DE
- 60388
- nnicolesusan093@gmail.com
- 1638127736