Integrated Wind Speed Direction Power Sensor Transmitter for Modbus Protocol RS485 C Shape 9V‑30V

2.699,00 DKK
GRATIS Levering

Integrated Wind Speed Direction Power Sensor Transmitter for Modbus Protocol RS485 C Shape 9V‑30V

  • Brand: Unbranded
Sоlgt af:

Integrated Wind Speed Direction Power Sensor Transmitter for Modbus Protocol RS485 C Shape 9V‑30V

  • Brand: Unbranded
RRP: 3.499,00 DKK
Pris: 2.699,00 DKK
Du sparer: 800,00 DKK (22%)
Sоlgt af:
2.699,00 DKK
GRATIS Levering

På lager

Vi accepterer følgende betalingsmetoder

Beskrivelse

Feature: 1. Integrated Wind Speed Direction Power Sensor: One piece wind speed and direction sensor is a highly integrated product of wind speed and direction sensors, assembled with stainless steel accuracy machined parts, high strength, easier to install. 2. Accurate: One of the wind speed part of the traditional 3 wind cup structure, the wind cup selection of imported ABS materials, high strength, good start, accurate signal processing unit can be output according to user requirements of a variety of signals, large range, good linearity, easy to observe, stable and reliable. 3. Weatherproof Design: Equipped with external rain hood and internal sealing ring for IP64 level waterproof, and dustproof. The sensor exhibits good dynamic characteristics and responds well to wind direction changes. Safe to use. Boasting wonderful performance and strong stability. 4. Working Principle: Wind direction part is used to measure the horizontal wind direction of the professional meteorological instruments, its internal use of accurate angle sensors, and the use of low inertia wind vane response to the wind direction, when the wind direction changes, the tail rotates the shaft rod to drive the sensor magnet, the angle sensor senses the magnetic pole orientation changes. 5. Versatile Installation: Suitable for a variety of installation methods, special fixing accessories design, can be installed horizontally or vertically. It has a simple design, but very practical in use, giving you a good using experience. Specification: Item Type: Wind Speed Direction Sensor Material: Stainless Steel, ABS, Aluminium alloy Weight: Approx. 2550.00g / 89.95oz Product Size: Approx. 569x295mm / 22.4x11.6in Measurement Object: Wind Speed, Wind Power, Wind Direction Operating Voltage: DC9V-30V Output: for Modbus Protocol RS485 Measurement Range: Wind Speed 0-70m/s Cable Length: 5.2m / 17.1ft Accuracy: Wind Speed: ±(0.3+0.03V)m/s (V Represents Real Time Wind Speed Value), Wind Direction: ±3 Degree Resolution: Wind Speed: 0.1m/s, Wind Direction: 1 Degree Starting Wind Speed: ≤0.5m/s Maximum Power Consumption: 0.9W Load Capacity: DC12V Power Supply, Current Output Impedance ≤350Ω, DC24V Power Supply, Current Output Impedance ≤900Ω, Voltage Output Impedance ≥1KΩ Operating Environment: Temperature -35℃ to 60℃, Humidity ≤100%RH Non Condensing Level: IP64 Cable Level: Rated Voltage: 300V 80℃ Widely Used in: Meteorology, Marine, Environmental, Airports, Ports, Laboratories, Agriculture, Traffic, etc. Connection Method (Wire Sequence): Wire Color-Output Signal (RS485): Red Power-Positive, Black-A+, Yellow-B-, Green-Power Negative Standard for Modbus RTU Intercom Protocol: Serial format: 8 bit data bits, 1 stop bit, no parity bits, default baud rate is 9600bps. Set the serial debugging software to hex for sending and receiving, with at least 500ms interval between two intercom. The CRC in the manual is the parity bit, 2 bytes. The default device address is 1. for Modbus CRC Verification Steps: 1. Preset a 16-bit register to hexadecimal FFFF, called this register the CRC Register; 2. XOR the first 8-bit data with the lower byte of the CRC register, put the result in the CRC register; 3. Shift the content of the register to the right by one bit (towards the lower bit), fill the highest bit with 0, check the lowest bit; 4. If the lowest bit is 0: repeat step 3 (shift again). If the lowest bit is 1: XOR the CRC register with the polynomial A001 (1010 0000 0000 0001); 5. Repeat steps 3 and 4 until shifting right 8 times, in this way the whole 8-bit data is processed; 6. Repeat steps 2 to 5 to process the next 8-bit data; 7. The final CRC register is the CRC code (the obtained CRC code is low before high). Troubleshooting: 1. The fan blade rotates sluggish, with large latency. Due to long-term use, there may be foreign objects in the bearing or it gets stuck. Please send the sensor back to the company for processing; 2. When outputting simulated signal or RS232, RS485, the meter displays incorrect value. This may be caused by wiring problems or intercom port failure leading to the inability to get accurate data. Please check if the wiring is correct and firm, whether the serial port is occupied, and whether the serial port is set correctly; 3. If it's not for the above reasons, please contact customer service.. Package List: 1 x Wind Speed Direction Sensor Note: 1. Do not connect the power line, check the wiring before power on. 2. The length of the sensor wire will affect the product output signal, do not modify the product at will when using. 3. Users should not disassemble them, contact the sensor surface with sharp objects or corrosive liquids during use to avoid damaging the product. 4. Wind direction sensor must be installed upwards.
  • Fruugo ID: 383816491-826050788
  • EAN: 7801870330296

Produktsikkerhedsinformation

Se venligst produktsikkerhedsoplysningerne, der er specifikke for dette produkt, beskrevet nedenfor

Følgende oplysninger leveres af den uafhængige tredjepartsforhandler, der sælger dette produkt.

Produktsikkerhedsmærker

CE Mark
Sikkerhedsadvarsler: Warning: Please read the product instructions carefully before use to ensure correct use.
Serienummer: 7801870330296

Levering og returnering

Sendt inden for 2 dage

  • STANDARD: GRATIS - Levering mellem kl tir. 21 oktober 2025–tir. 28 oktober 2025 - GRATIS

Afsendes fra Kina.

Vi gør vores bedste for at sikre, at de produkter, du bestiller, leveres til dig fuldt ud og i henhold til dine specifikationer. Skulle du dog modtage en ufuldstændig ordre eller andre ting end dem, du bestilte, eller der er en anden grund til, at du ikke er tilfreds med ordren, kan du returnere ordren eller produkter inkluderet i ordren og modtage en fuld refusion for varerne. Se fuld returpolitik

Detaljer om produktoverholdelse

Se venligst overensstemmelsesoplysningerne, der er specifikke for dette produkt, beskrevet nedenfor.

Følgende oplysninger leveres af den uafhængige tredjepartsforhandler, der sælger dette produkt.

Producent:
De følgende oplysninger angiver kontaktoplysningerne for producenten af det relevante produkt, der sælges på Fruugo.

  • Wuhan Jinxingkai Network Technology Co., Ltd.
  • Wuhan Jinxingkai Network Technology Co., Ltd.
  • No. 1-1, Door 57
  • Shihua Village
  • Qingshan District
  • Wuhan
  • CN
  • 430000
  • goldxinks@163.com
  • 0086 17786498762
  • https://shop01473o1711614.1688.com/page/creditdetail.htm?spm=a261y.7663282.shopNavigation.1.6310755czE9SFQ

Ansvarlig person i EU:
De følgende oplysninger angiver kontaktoplysningerne for den ansvarlige person i EU. Den ansvarlige person er den udpegede økonomiske aktør med hovedsæde i EU, der er ansvarlig for overensstemmelsesobligationerne i forbindelse med det relevante produkt, der sælges til den Europæiske Union.

  • None
  • Kequ Technology s.r.o.
  • Pražákova 1008/69
  • Štýřice
  • Jihomoravský kraj
  • Brno
  • CZ
  • 63900
  • christopher25106@outlook.com
  • 420608214795