SAE Adaptor IEC 62196 Type 2 to J1772 Type 1 for Electric Vehicle Charging Complies with SAE J1772 standard Sleek design with protective cover, supports front installation Pins feature insulation to prevent accidental contact; protection level reaches IP54 Converts European Type 2 to American Type 1 connector Designed for EV charging applications Mechanical Specifications: Mechanical life: 10,000 no-load插拔 cycles Insertion force during coupling: less than 80N, greater than 45N Electrical Specifications: Rated working current: 16A or 32A Working voltage: 110V–250V Insulation resistance: 1000MΩ (DC500V) Terminal temperature rise: less than 50K Withstand voltage: 2000V Contact resistance: maximum 0.5mΩ Operating Environment: Working temperature range: -30°C to +50°C Usage Instructions: 1. Connect the Type 2 end of the adapter to the charging cable 2. Insert the Type 1 end into the vehicle’s charging inlet 3. Once securely clicked into place, initiate charging Remember to activate the charging station to begin charging After charging, disconnect from the vehicle side first, then the charging station side Remove the adapter from the charging station when not in use Material: Thermoplastic Color: Black Package Includes: 1 x EV Charging Adapter Note: The package includes only the items listed above. Other accessories are not included. Note: Lighting and display differences may cause slight color variations between the image and the actual product. Measurement tolerance: ±1–3 cm.