Feature:1. [High Bandwidth] 2 channel handheld oscilloscope, 120MHz bandwidth, minimum range 10mV/div, 500MSa/s sampling rate, advanced digital trigger system. Up to 120M bandwidth easily cope with various fields of measurement test.2. [FFT Spectrum And Cursor Measurement] Professional portable oscilloscope with FFT display function can analyze the spectral characteristics of the signal. Cursor measurement function, convenient for manual measurement of period, frequency and voltage.3. [Multi Function] DIY oscilloscope kit is configured with 3 trigger modes, auto, normal and single trigger. Support time base, amplitude, trigger slope and other waveform parameters settings, support waveform one key AUTO automatic screen adaptation, no need to adjust parameters.4. [High Accuracy And Range] The bottom of the digital oscilloscope can output sine wave, square wave, triangular wave, half wave, for singer wave and other 2.5V amplitude waveform, the frequency adjustment range of sine wave is 0‑10MHz, other waveform frequency range 0‑2MHz, up to 0.1Hz accuracy.5. [14 Measurement Options] Handheld digital oscilloscope has 14 measurement options available, including frequency, Peak to Peak, duty cycle, amplitude, RMS, average, period, + pulse width, ‑ pulse width, maximum, minimum, top, and bottom.6. [Built In ARM And FPGA] This handheld oscilloscope multimeter uses ARM and FPGA chips with it to provide high speed signal acquisition and high speed data processing, giving you a better experience and rich functions.7. [Multi Application] Digital oscilloscope can be used for mcu debugging, auto repair, home appliance repair, DIY debugging, gaming, power supply debugging, inverter, etc. It can also be used as a portable tool for on site debugging.Specification:Item Type: Handheld OscilloscopeMaterial: ABSBuilt in Battery: Lithium Battery 3000mahNumber of Channels: 2Screen Size: 2.8 InchesScreen Resolution: 320 x 240Analog Bandwidth: 120M (Single CH1) Sampling Rate: 500MRise Time: <3nsStorage Depth: 128KbInput Impedance: 1MΩTime Base Range: 5ns- 10sVertical Sensitivity: 10mV/div-100V/divMaximum Measurement Voltage: ±40V (Probe 1x Gear), ±400V (Probe 10x Gear)Trigger Mode: Auto, NormalTrigger Type: Rising Edge, Falling EdgeDisplay Mode: YT, XY, RollAfterglow Time: None, 1s, ∞One Button Auto: SupportWaveform Measurement: 14 KindsMeasurement Accuracy: ±2%XY Mode: SupportWaveform Saving: SupportFrequency Accuracy: ±0.01%Single Trigger: SupportFT: SupportSignal Source Amplitude: 2.5V±0.05Signal Source Frequency: Sine 0-10M, Other 0-2M.Package List:1 xHandheld Oscilloscope2 x Probe1 x Type C Cable2 x Clamp Cable1 x RCA Cable4 x Plastic Ring1 x Adjustment Tool2 x Probe Cover1 x Storage Bag1 x Instruction Manual