Feature: 1. This module is specially designed for the application scheme with the generator set as the backup power source. Can automatically monitors the state of the mains and automatically controls the start and stop of the generator set 2. Indicate the current working status, related parameters, fault content, etc. by highlighting LED and LCD 3. With three remote functions, parameter settings can be performed on the panel, and also support microcomputer control 4. Come with visual alarm and status graphic mark, instructions and quick display of information 5. Internal programmable high current output, suitable for a variety of models, can be connected with PC to realize remote monitoring and parameter setting Specification: Item Type: Generator Auto Start Control Panel Specifications: Power Supply: DC 8～36 V Current Consumption: 180mA, 12V; 190mA, 24V Voltage Input Range: AC 20～300 V, 50 Hz or 60 Hz system Internal Programmable Control Output: Active DC, ≤2.4 ampere Oil Valve and Motor Control Output: Active DC, ≤3.4 ampere Transformer: Secondary current 5 ampere, 0.5VA Operating Temperature Range: -20℃ ～ 70℃ Product Size: Approx. 209 x 146 x 31mm / 8.2 x 5.7 x 1.2in Installation Opening: Approx. 182 x 137mm / 7.2 x 5.4in Control Function: Automatic mains monitoring Emergency stop control Automatic control of cranking Local manual start/stop Remote automatic start/stop Start the motor automatically exit control Multiple modes of preheating control Stop power supply control Dual power switch switching control Start delay control Protective Function: Low lubricating oil pressure protection The charger fails to charge Emergency shutdown of generator set Generating set public alarm Generator overvoltage, permanent voltage and overload protection High cooling water temperature protection Engine overclocking protection Engine low frequency protection Engine shutdown failed Engine failed to start Alarm Indication: Corresponding alarm indication mark on the LCD screen The public alarm light is always on for warning; flashing for alarm Parameter Configuration: Parameter configuration through the control panel Parameter configuration through dedicated software Parameter Display: Battery voltage Lubricating oil pressure Running time Generator frequency, voltage, current Cooling water temperature. Package List: 1 x Generator Auto Start Control Panel1 x User Manual Note: Please set according to the function introduction of the manual, and connect correctly according to the wiring diagram.