For StickCPlus ESP32 2-in-1 Module for StickC Plus, Supports NRF24 2.4GHz and CC1101 433MHz,with Fi

259,00 DKK
+ 49,49 DKK Levering

For StickCPlus ESP32 2-in-1 Module for StickC Plus, Supports NRF24 2.4GHz and CC1101 433MHz,with Fi

  • Brand: Unbranded
  • product image
  • product image
  • product image
  • product image
  • product image

For StickCPlus ESP32 2-in-1 Module for StickC Plus, Supports NRF24 2.4GHz and CC1101 433MHz,with Fi

  • Brand: Unbranded
RRP: 309,00 DKK
Pris: 259,00 DKK
Du sparer: 50,00 DKK (16%)
Sоlgt af:
259,00 DKK
+ 49,49 DKK Levering

På lager

Vi accepterer følgende betalingsmetoder

Beskrivelse

This dual-mode development board is specially designed for the StickC Plus, integrating both A01-S2G4A00S2A (2.4GHz NRF24) and A07-S433A10S2A (433MHz CC1101) modules. Fully compatible with firmware, it features a plug-and-play design and supports both short-range and long-range wireless communication, making it ideal for IoT, wireless control, and development projects. Dual-module design: Supports both NRF24 (2.4GHz) and CC1101 (433MHz) communication. Tailored for StickC Plus, plug-and-play. firmware compatible, no complex setup required. High-performance communication for reliable data transmission. Physical switch for easy module selection 2.4GHz NRF24 Module (A01-S2G4A00S2A): Stable, high-speed short-range wireless communication. 433MHz CC1101 Module (A07-S433A10S2A): Low-power, long-range transmission Reliable performance with optimized signal layout and power design Usage Instructions 1. Flash Firmware (First-Time Setup). To use this board with StickC Plus, first flash the firmware. Follow the instructions to select the correct device (StickC Plus v1.1/v2) and complete the flashing process 2. Hardware Connection, Connect the board to the StickC Plus using the Grove cable or GPIO jumper wires. The GPIO pinout is pre-configured and compatible with firmware 3. Switching Between Modules, This board includes a physical switch to toggle between the two modules: To use the CC1101 (433MHz) module: 1. Toggle the switch to the 433MHz (CC1101) position 2. Navigate in the firmware: CONFIG MODULE 3. Select: CC1101 (legacy) To use the NRF24 (2.4GHz) module: 1. Toggle the switch to the 2.4GHz (NRF24) position 2. Navigate in the firmware: NRF24 CONFIG Pins 3. Select: NRF24 (legacy) 4. Additional Docu Color: As Shown Material: PCB Package Contents: 1 * Module 2 * Antennas 1 * Connecting Cable 1 * Housing Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
  • Fruugo ID: 413136767-873209433
  • EAN: 4713491185311

Levering og returnering

Sendt inden for 3 dage

  • STANDARD: 49,49 DKK - Levering mellem kl man. 06 oktober 2025–tir. 14 oktober 2025

Afsendes fra Kina.

Vi gør vores bedste for at sikre, at de produkter, du bestiller, leveres til dig fuldt ud og i henhold til dine specifikationer. Skulle du dog modtage en ufuldstændig ordre eller andre ting end dem, du bestilte, eller der er en anden grund til, at du ikke er tilfreds med ordren, kan du returnere ordren eller produkter inkluderet i ordren og modtage en fuld refusion for varerne. Se fuld returpolitik

Detaljer om produktoverholdelse

Se venligst overensstemmelsesoplysningerne, der er specifikke for dette produkt, beskrevet nedenfor.

Følgende oplysninger leveres af den uafhængige tredjepartsforhandler, der sælger dette produkt.

Producent:
De følgende oplysninger angiver kontaktoplysningerne for producenten af det relevante produkt, der sælges på Fruugo.

  • shen zhen shi yi qu wan ju you xian gong si
  • Shen Zhen Shi Yi Qu Wan Ju You Xian Gong Si
  • long gang qu bu ji jie dao bu ji yi cun long xiang hua yuan C12 dong 803 shi
  • Shenzhen
  • China
  • 518000
  • pueplelris@outlook.com
  • 13392015041

Ansvarlig person i EU:
De følgende oplysninger angiver kontaktoplysningerne for den ansvarlige person i EU. Den ansvarlige person er den udpegede økonomiske aktør med hovedsæde i EU, der er ansvarlig for overensstemmelsesobligationerne i forbindelse med det relevante produkt, der sælges til den Europæiske Union.

  • 0utong?GmbH
  • 0utong GmbH
  • Brehmstr, 56,40239 Duesseldorf
  • Brehmstr
  • Germany
  • 40239
  • info@outong.de
  • 4921131054698