1. It is the most cost-effective artnet and dmx adapter with very comprehensive functions.2. With the led display and 4 function buttons,you need not to find some applications or a web configuration to set it up.3. there is a M10 screw holes on the top of the node box,you can install it on the truss with a stage light clamp hook4. Built tough and compact the adapter can be powered by PoE (power over ethernet),get a PoE switch,You can use the existing network cable instead of the power cable to power the device, which is very convenient5. 2x DMX512 Out (3pin) with Art-Net, control up to 1024 channels.2 standard DMX512 data output ports are provided, supporting 2x170 LED pixels;ArtNet can be managed in broadcast or unicast mode;1 ArtNet data can be input, 2 DMX512 data can be output; (total can output 1024 channels)All network configuration parameters can be directly modified through the built-in buttons and display (no need to connect to a computer for setting)Other software, consoles, and Art-Net-supported controllers can be used to distribute Art- through Net data.Commonly used to expand the Touch or MA2 console, and the DMX output port of softwareInstallation : It can be installed with a light hook or any safe location.Support two power supply methods: (mains and network cable power supply POE)Plug Type:EU Plug,it applies to Indonesia, Germany, France, , Italy and so on.Voltage:90-240VColour:BlackMaterial:Metal+PlasticPackage Contents:1 * DMX 512 Ethernet Lighting ControllerOnly the above package content, other products are not included.Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.