Cjmcu-mlx90614 Bcc Human Body Infrared Thermometer Non-contact Thermometer Serial Output Module

749,00 DKK
+ 53,99 DKK Levering

Cjmcu-mlx90614 Bcc Human Body Infrared Thermometer Non-contact Thermometer Serial Output Module

Sоlgt af:

Cjmcu-mlx90614 Bcc Human Body Infrared Thermometer Non-contact Thermometer Serial Output Module

RRP: 2.099,00 DKK
Pris: 749,00 DKK
Du sparer: 1.350,00 DKK (64%)
Sоlgt af:
749,00 DKK
+ 53,99 DKK Levering

På lager

Vi accepterer følgende betalingsmetoder

Beskrivelse

   Feature:  CJMCU-90614 is a low-cost infrared temperature module.  Working voltage 3-5v Low power consumption and small size.  Its working principle is to read infrared temperature data through single chip microcomputer, serial port (TTL level).  Communication mode output (the baud rate can be set): the baud rate of the serial port is 9600bps, 57600 and 115200bps.  There are two ways of continuous output and query output, which can adapt to different working environments and connect with all single chip computers and computers.  Object distance ratio: 1.6: 1.     letter of agreement:   Serial communication parameters (default baud rate value is 115200 bps, which can be set by software).  Baud rate: 9600 bps Check digit: N Data bit: 8 Stop bit: 1.  Baud rate: 57600 bps Check digit: N Data bit: 8 Stop bit: 1.  Baud rate: 115200 bps Check digit: N Data bit: 8 Stop bit: 1.  Module output format:  Instruction length: 9.     Data output format:  Byte1 frame header logo 0x66.  Byte2 frame header logo 0x66.  Byte3 data output mode (0x01 continuous output; 0x02 query output, default is continuous output mode).  Byte4 measurement data length (counted by Byte).  Byte5 data 1 high 8 bits.  Byte6 data 1 low 8 bits.  Byte7 data 2 high 8 bits.  Byte8 data 2 lower 8 bits.  Byte9 data parity bit (all 8 bits of data are accumulated).     Data calculation method:  Temperature = 8 bits of data high << 8 bits of data low, the result is the actual temperature multiplied by 100.  Command instruction (send to MCU, set various parameters).  Byte1 frame header logo 0x66.  Byte2 frame header flag 0x66.  Byte3 setting command.  0x01 continuous output mode.  0x02 query output mode.  0x11 Set baud rate to 9600.  0x12 Set the baud rate to 57600.  0x13 Set the baud rate to 115200.  Byte4 end of frame flag 0x56.     Instructions:  The module outputs data for the serial port, connect the module to the power supply, connect the serial port (the default is 115200 baud rate, continuous transmission mode), and the serial port outputs directly. If you want to change the sending method, you can send the command 66 66 02 56 to the module, and then send the command every time, the module will return the temperature data once. If you want to change the baud rate to 9600, you can send 66 66 11 56 to the module. If you want to change the baud rate to 57600, you can send 66 66 12 56 to the module.     Note:  No MCU source code is provided.     Package includes:  1 x Sensor board with pins
  • Fruugo ID: 311468076-695877217
  • EAN: 8727971208175

Produktsikkerhedsinformation

Se venligst produktsikkerhedsoplysningerne, der er specifikke for dette produkt, beskrevet nedenfor

Følgende oplysninger leveres af den uafhængige tredjepartsforhandler, der sælger dette produkt.

Sikkerhedsadvarsler: Not suitable for children under 36 months, The parcel bag is not a toy. Keep away from children to avoid suffocation hazards.

Levering og returnering

Sendt inden for 2 dage

  • STANDARD: 53,99 DKK - Levering mellem kl tir. 21 oktober 2025–fre. 31 oktober 2025

Afsendes fra Kina.

Vi gør vores bedste for at sikre, at de produkter, du bestiller, leveres til dig fuldt ud og i henhold til dine specifikationer. Skulle du dog modtage en ufuldstændig ordre eller andre ting end dem, du bestilte, eller der er en anden grund til, at du ikke er tilfreds med ordren, kan du returnere ordren eller produkter inkluderet i ordren og modtage en fuld refusion for varerne. Se fuld returpolitik

Detaljer om produktoverholdelse

Se venligst overensstemmelsesoplysningerne, der er specifikke for dette produkt, beskrevet nedenfor.

Følgende oplysninger leveres af den uafhængige tredjepartsforhandler, der sælger dette produkt.

Producent:
De følgende oplysninger angiver kontaktoplysningerne for producenten af det relevante produkt, der sælges på Fruugo.

  • GreenZech
  • Shenzhen GreenZech Technology Co.,Ltd
  • 16C B97 Fuxuan Dalong Jiedao Longhua District
  • Guangdong China
  • Shenzhen
  • CN
  • 518000
  • 1158738758@qq.com
  • 14774955154

Ansvarlig person i EU:
De følgende oplysninger angiver kontaktoplysningerne for den ansvarlige person i EU. Den ansvarlige person er den udpegede økonomiske aktør med hovedsæde i EU, der er ansvarlig for overensstemmelsesobligationerne i forbindelse med det relevante produkt, der sælges til den Europæiske Union.

  • SUCCESS COURIER SL
  • SUCCESS COURIER SL
  • CALLE RIO TORMES NUM.1,PLANTA 1,DERECHA
  • OFICINA 3,Fuenlabrada
  • Madrid
  • ES
  • 28947
  • successservice3@gmail.com
  • +34 910602659