CAN-L4-3100 Magnetometer RM3100 GPS Geomagnetic Sensor High Resolution Low Power Consumption Model A

339,00 DKK
+ 62,99 DKK Levering

CAN-L4-3100 Magnetometer RM3100 GPS Geomagnetic Sensor High Resolution Low Power Consumption Model A

  • Brand: Unbranded
  • product image
  • product image
  • product image
  • product image
  • product image

CAN-L4-3100 Magnetometer RM3100 GPS Geomagnetic Sensor High Resolution Low Power Consumption Model A

  • Brand: Unbranded
RRP: 849,00 DKK
Pris: 339,00 DKK
Du sparer: 510,00 DKK (60%)
Sоlgt af:
339,00 DKK
+ 62,99 DKK Levering

På lager

Vi accepterer følgende betalingsmetoder

Beskrivelse

1. CAN-L4-3100 is a professional grade CAN Magnetometer based on RM3100 & ArudPilot AP_Periph firmware. 2. RM3100 sensor technology provides high resolution, low power consumption, large signal noise immunity, a large dynamic range, and high sampling rates. Measurements are stable over temperature and inherently free from offset drift. 3. Equipped with the RM3100 magnetometer, this GPS sensor offers unparalleled accuracy in geomagnetic field measurement. Its high resolution ensures precise navigation and positioning. 4. Designed for efficiency, the CAN-L4-3100 operates on minimal power, making it ideal for sustained use in various applications without frequent battery replacements. 5. With its robust anti-interference capabilities, the sensor maintains strong signal integrity even in environments with high electromagnetic noise, ensuring reliable performance.<br><br>PNI RM3100 Geomagnetic Sensor CAN node MCU:STM32L431xC,256KB Flash Interface: CAN, DroneCAN Protocol UART2, MSP output (MatekL431-Periph fw) UART3, for external GNSS module ST debug, SWCLK & SWDIO LED: Blue, Fast blinking, Booting Blue, Slow blinking, working Red, 3.3V indicator Power supply for CAN-L4-3100 board:4.5-5.5V @5V pad/pin Power consumption: 22mA Operating Temperatures:-40-85℃ Parameters: CAN_P1_DRIVER = 1 if attached to CAN bus1 port or CAN_P2_DRIVER = 1 if attached to CAN bus2 port COMPASS_AUTODEC = 1 Tips: CAN-L4-3100 is pre-installed with "MatekL431-GPS" firmware. MSP feature is disabled in "MatekL431-GPS". If you want to use MSP feature, reflash it with "MatekL431-Periph" firmware(AP_Periph_with_bl.hex) over SWC/SWD pads via ST-LINK. Put magnetometer far from power lines/ESC/motors/iron based material. greater than equal 10cm 2 ears for mounting can be cut off ifyou don't need it. If the CAN wires are too long, bridge the "120R" jumper. Due to differe
  • Fruugo ID: 382453283-823798114
  • EAN: 6974724765993

Levering og returnering

Sendt inden for 2 dage

  • STANDARD: 62,99 DKK - Levering mellem kl tor. 02 oktober 2025–tor. 09 oktober 2025

Afsendes fra Kina.

Vi gør vores bedste for at sikre, at de produkter, du bestiller, leveres til dig fuldt ud og i henhold til dine specifikationer. Skulle du dog modtage en ufuldstændig ordre eller andre ting end dem, du bestilte, eller der er en anden grund til, at du ikke er tilfreds med ordren, kan du returnere ordren eller produkter inkluderet i ordren og modtage en fuld refusion for varerne. Se fuld returpolitik

Detaljer om produktoverholdelse

Se venligst overensstemmelsesoplysningerne, der er specifikke for dette produkt, beskrevet nedenfor.

Følgende oplysninger leveres af den uafhængige tredjepartsforhandler, der sælger dette produkt.

Producent:
De følgende oplysninger angiver kontaktoplysningerne for producenten af det relevante produkt, der sælges på Fruugo.

  • Changji
  • Shenzhen Jinyu E-commerce Co., Ltd
  • Longcheng Avenue No. 89, Ximen, Zhengzhong Shidai Building, Block A, Room 2706Z4L
  • Shenzhen
  • CN
  • 518000
  • tianyuancha02@outlook.com
  • 13243142768

Ansvarlig person i EU:
De følgende oplysninger angiver kontaktoplysningerne for den ansvarlige person i EU. Den ansvarlige person er den udpegede økonomiske aktør med hovedsæde i EU, der er ansvarlig for overensstemmelsesobligationerne i forbindelse med det relevante produkt, der sælges til den Europæiske Union.

  • EC REP SERVICES SL
  • EC REP SERVICES SL
  • Calle Gran Via 49, 7 Dch
  • Madrid
  • ES
  • 28013
  • ecrepservice@hotmail.com
  • 0034-682797075