Portable Spot Welder Digital Display Long Standby Time Built in Ammeter Short Circuit Protection Spot Welding Machine

774,00 DKK
+ 75,49 DKK Levering

Portable Spot Welder Digital Display Long Standby Time Built in Ammeter Short Circuit Protection Spot Welding Machine

  • Brand: Unbranded
Sоlgt af:

Portable Spot Welder Digital Display Long Standby Time Built in Ammeter Short Circuit Protection Spot Welding Machine

  • Brand: Unbranded

774,00 DKK

Spar 775,00 DKK (50%)

Vejl. Pris

1.549,00 DKK
På lager
+ 75,49 DKK Levering
Sоlgt af:

774,00 DKK

Spar 775,00 DKK (50%)

Vejl. Pris

1.549,00 DKK
På lager
+ 75,49 DKK Levering

Vi accepterer følgende betalingsmetoder

Beskrivelse

Item Type: Portable Spot Welder Product Material: Aluminum Alloy Product Size: Approx. 11 x 8 x 3cm / 4.3 x 3.1 x 1.2in Built in Battery Model: 18650 Capacity: 5000mah Features: Weldable Nickel Plated Tape: Maximum weldable 0.2mm nickel plated tape, 0.25mm slotted nickel tape to assemble 18650 and other battery packs, recommended for long term use of 0.15mm Long Standby Time: The standby time can be up to 1 year when it is turned off, and the storage time can be up to 3 years. GEAR: gear adjustment, short press the white button to switch the mode, the arrowhead points to xxms, long press the black button to adjust the gear, divided into 30 gears DELAY: Delay adjustment, the adjustment method is the same as the gear BAT: battery power display, real time monitoring of battery voltage, low battery sound and power warning, automatic shutdown TEST: The actual output of the current value measured by the welding pen Short Circuit Protection: The machine is equipped with short circuit protection to monitor each weld x: Indicates short circuit protection Use scenario 1: power bank, toy car maintenance, because the power bank, toy car current is relatively small, generally between 1-3A, you can use 0.1 nickel tape spot welding. Adjust the parameters (GEAR=5ms DELAY=0.8S) to easily weld, the solder joints are very bright, not black, not oxidized, greatly increasing the service life Use Scenario 2: Pointed batteries are generally easier to obtain, but due to a concave position, ordinary spot welders can only be adjusted in five or six gears. If the pressure is too tight, it cannot be welded, and if it is too light, it will burn through. Use this welding machine to adjust the parameters (GEAR=7ms DELAY=0.8S) to properly increase the current output. Nickel strips are spot welded firmly in the grooves. Perfectly achieve maintenance goals. Use scenario 3: Power lithium battery, which can provide huge current. Power tools, electric vehicles all use it to assemble industrial 0.15mm or even 0.2mmn nickel strips. Just adjust the parameters (GEAR=30MS DELAY=1.2S)
  • Fruugo ID: 321561519-713450173
  • EAN: 1121763861734

Levering og returnering

Sendt inden for 3 dage

  • STANDARD: 75,49 DKK - Levering mellem kl tor. 30 oktober 2025–tor. 06 november 2025

Afsendes fra Kina.

Vi gør vores bedste for at sikre, at de produkter, du bestiller, leveres til dig fuldt ud og i henhold til dine specifikationer. Skulle du dog modtage en ufuldstændig ordre eller andre ting end dem, du bestilte, eller der er en anden grund til, at du ikke er tilfreds med ordren, kan du returnere ordren eller produkter inkluderet i ordren og modtage en fuld refusion for varerne. Se fuld returpolitik

Detaljer om produktoverholdelse

Se venligst overensstemmelsesoplysningerne, der er specifikke for dette produkt, beskrevet nedenfor.

Følgende oplysninger leveres af den uafhængige tredjepartsforhandler, der sælger dette produkt.

Producent:
De følgende oplysninger angiver kontaktoplysningerne for producenten af det relevante produkt, der sælges på Fruugo.

  • 91440300MA5HDL2A4K
  • SHEN ZHEN SHI LAI LI ZHU BAO SHI PIN MAO YI YOU XIAN GONG SI
  • Room B, 21F, Block A, Jingang Huating, 4009 Baoan Avenue, Yantian Community, Xixiang Street, Baoan District, Shenzhen
  • Shenzhen
  • CN
  • 518102
  • 939301410@qq.com
  • 15625700418

Ansvarlig person i EU:
De følgende oplysninger angiver kontaktoplysningerne for den ansvarlige person i EU. Den ansvarlige person er den udpegede økonomiske aktør med hovedsæde i EU, der er ansvarlig for overensstemmelsesobligationerne i forbindelse med det relevante produkt, der sælges til den Europæiske Union.

  • 950891051
  • MJCM SARL
  • 78 avenue des Champs Elysees Bureau 326, 75008 Paris, France
  • Paris
  • FR
  • 75008
  • mjcm190928@gmail.com
  • 0033 767213611