Name: Electronic drain valve Model: 507292 Indicator lamp: LED indicating power on / off Voltage range: +/-10% Protection: IP65 Insulation: H Maximum working pressure: 1.6Mpa Maximum temperature: 90 Celsius Operating temperature: -40 Celsius to 60 Celsius The largest current consumption: 4mA Power supply voltage: 24-240V AC/DC 50/60Hz Discharge time (ON): 0.5--10 seconds Time interval (OFF): 0.5--45 minutes Widely used in separators, dryers, gas tanks, drip legs, and other compressed air system components Clean the compressed air system installation Note: Observe the direction of the valve when installing: outlet; do not use the hose not against the impact of air. Power supply voltage should match the drain valve voltage. The wire must be connected to connector "1" when using DC. When leaving the drain valve connected to the cable, brown is L (live), blue is N, yellow-green is the safety ground wire GND. Be sure to tighten the long screw on the terminal box to prevent water from entering. Warning: When installing the electronic drain valve, ensure that: Compressed air has been fully emptied (not under pressure). The power supply has been switched off. Color: Gold + black Material: metal Size: 5 mm In / out port size: 1/2 inch Package Contents: 1 x Electronic drain valve Only the above package content, other items are not included. Note: Lighting and different displays may cause the color of the item to appear slightly different from the real thing. The measurement allowed error is +/- 1-3cm.