- Not an original spare part- Protects the overrun brake slide rail from dust, dirt and moistureA hit-and-run brake clutch gaiter protects the overrun brake slide bar from dust, dirt and moisture. When braking, the sliding bar slides in when the trailer or trailer pushes. This activates the brakes. The sliding bar is made of steel and lubricated to glide as smoothly as possible. The coupling gaiter prevents dirt and dust from getting on the grease and thus allows the sliding rod to do its best work. Since the clutch gaiter gaiter is exposed to all weather conditions, it should be replaced well in advance to keep the overrun brake well protected.Changing the clutch gaiter:Important when replacing is the type and/or brand of the overrun brake (found on the rating plate on the overrun brake), this determines the size of the clutch gaiter.Measuring the diameter on the clutch side and the diameter on the overrun brake side is also an option. Note recesses for e.g. ball coupling mounting bolts.Using wrench 19, remove the bolts/nuts on the coupling and remove the coupling gaiter. Install the new coupling gaiter. This can be tied down with a tie-wrap.Replace the coupling and fit bolts/nuts with a wrench or latch 19.Coupling gaiter 50/60mm L=125 suitable for AL-KO SZRH A-C