Feature: 1. Incubation Temperature Control: The automatic incubator controller allows for precise temperature control during the incubation process, ensuring optimal conditions for successful hatching. 2. Easy to Use: With its user-friendly design and intuitive interface, this incubation temperature controller makes it easy to set and monitor the temperature, suitable for both beginners and experienced breeders. 3. Temperature Range: The incubator temperature controller maintains a stable temperature range of 0-99°C, creating a reliable and consistent environment for egg development and hatching. 4. With Egg Lamp: The included egg lamp provides essential lighting for monitoring eggs without disturbing them, allowing you to observe progress without affecting development. 5. Temperature Calibration: The temperature control function can be easily calibrated to ensure accurate readings. This feature allows you to fine-tune the temperature settings for optimal incubation conditions. Specification: Item Type: Incubation Temperature Controller Size: Approx. 12.2 x 6.5 cm / 4.8 x 2.6 in Temperature Display Range: 0-99°C Temperature Resolution: 0.1°C Output: 1 Heating, 1 Egg Lamp Relative Humidity: Less than 85% Ambient Temperature: -20°C to 70°C Weight: Approx. 193 g / 6.8 oz Material: ABS In normal working state, press the setting key (short press), the device enters the reference temperature parameter setting. Reference Temperature Setting Range: 0.0-99.9°C Factory Default Value: 37.8°C In normal working state, press and hold the Set and Increase keys simultaneously for more than 3 seconds (long press), the device enters the temperature calibration mode. Temperature Calibration Settings: Can be adjusted according to an external thermometer. In normal working state, press and hold the Increase and Decrease keys for more than 3 seconds (long press), the device restores factory settings. Control Function: 1. Heating Function: When the measured temperature TH1 is less than the set point PP, heating starts; when TH1 exceeds PP, heating stops. 2. Egg Lighting Function: In normal operation, press the egg lamp key to turn on the light; press again to turn it off. 3. Calibration Function: The temperature sensor may drift over time and can be calibrated using an accurate thermometer. Press and hold the Set and Increase keys simultaneously; the display will blink showing the sensor temperature. Use the Increase and Decrease keys to adjust the reading to match the reference thermometer. 4. Sensor Error Indication: If the temperature sensor fails or is disconnected, the display shows "EE" and heating stops automatically. Package List: 1 x Incubation Temperature Controller 1 x Power Cord 1 x Crocodile Clip Wire