4 Inch DC12V 235CFM Inline Bilge Air Blower High Airflow Electric Inline Marine Fan for RV, Boat, Yacht

389,00 DKK
GRATIS Levering

4 Inch DC12V 235CFM Inline Bilge Air Blower High Airflow Electric Inline Marine Fan for RV, Boat, Yacht

  • Brand: Unbranded
Sоlgt af:

4 Inch DC12V 235CFM Inline Bilge Air Blower High Airflow Electric Inline Marine Fan for RV, Boat, Yacht

  • Brand: Unbranded
RRP: 499,00 DKK
Pris: 389,00 DKK
Du sparer: 110,00 DKK (22%)
Sоlgt af:
389,00 DKK
GRATIS Levering

På lager

Vi accepterer følgende betalingsmetoder

Beskrivelse

Feature: 1. High Performance: The air blower fan is designed for high efficiency and high output operation, the front and rear shaft seals and corrosion resistant motor housings for long life. 2. Wide Application: Can be installed on any flat surface and provides higher air flow, lower amp draw, and quieter operation than standard blowers. 3. Five Blade: RV air vent fan is designed with five blade fan for maximizes airflow and efficiency, sealed motor shaft for moisture protection. 4. Parameter: The air flow is 235CFM, operating voltage is DC12V, 7A fuse, 4inch size, can be installed in bilge, machine room, aisle and canopy. 5. Fine Workmanship: Exquisite workmanship, beautiful appearance design, compact and portable, providing you great using experience. Specification: Item Type: Air Blower Material: ABS shell, copper motor core Air Flow: 235CFM Working Voltage: DC12V Fuse: 7A Current: 4 Amps Size: Approx. 4inch/102mm Fitment: Suitable for RVs, boats, yachts, ideal for bilge, engine rooms, aisles and canopies Installation: 1. Install the fan with two M6 screws in the upper part of the bilge, power room, kitchen and toilet. When fixing the screws, the screws should not be over tightened to prevent penetration through the chassis. 2. The fan should be moderately inclined when installed, which is convenient to prevent rain erosion. The direction of the arrow is the exhaust port (the correct airflow direction must be confirmed before installation). 3. Fix the diameter (235CFM-4 inch) inlet and outlet conduit with stainless steel pipe buckle. 4. The intake duct should be permanently installed and fixed above the bilge plane and properly located under the engine. Connection: 1. Brown is the positive electrode, black is the negative electrode, use crimp contact joint. The joint uses a sealant to resist water. 2. The positive electrode must be connected to the fuse 3. The positive pole must be connected to a disconnect or connection switch with the same power as the fuse. 4. The minimum wire diameter is 16AWG .. Package List: 1 x Inline Blower1 x Manual
  • Fruugo ID: 413519871-873942653
  • EAN: 7603816544176

Produktsikkerhedsinformation

Se venligst produktsikkerhedsoplysningerne, der er specifikke for dette produkt, beskrevet nedenfor

Følgende oplysninger leveres af den uafhængige tredjepartsforhandler, der sælger dette produkt.

Produktsikkerhedsmærker

CE Mark
Sikkerhedsadvarsler: Warning: Please read the product instructions carefully before use to ensure correct use.
Serienummer: 7603816544176

Levering og returnering

Sendt inden for 2 dage

  • STANDARD: GRATIS - Levering mellem kl man. 20 oktober 2025–man. 27 oktober 2025 - GRATIS

Afsendes fra Kina.

Vi gør vores bedste for at sikre, at de produkter, du bestiller, leveres til dig fuldt ud og i henhold til dine specifikationer. Skulle du dog modtage en ufuldstændig ordre eller andre ting end dem, du bestilte, eller der er en anden grund til, at du ikke er tilfreds med ordren, kan du returnere ordren eller produkter inkluderet i ordren og modtage en fuld refusion for varerne. Se fuld returpolitik

Detaljer om produktoverholdelse

Se venligst overensstemmelsesoplysningerne, der er specifikke for dette produkt, beskrevet nedenfor.

Følgende oplysninger leveres af den uafhængige tredjepartsforhandler, der sælger dette produkt.

Producent:
De følgende oplysninger angiver kontaktoplysningerne for producenten af det relevante produkt, der sælges på Fruugo.

  • Wuhan Jinxingkai Network Technology Co., Ltd.
  • Wuhan Jinxingkai Network Technology Co., Ltd.
  • No. 1-1, Door 57
  • Shihua Village
  • Qingshan District
  • Wuhan
  • CN
  • 430000
  • goldxinks@163.com
  • 0086 17786498762
  • https://shop01473o1711614.1688.com/page/creditdetail.htm?spm=a261y.7663282.shopNavigation.1.6310755czE9SFQ

Ansvarlig person i EU:
De følgende oplysninger angiver kontaktoplysningerne for den ansvarlige person i EU. Den ansvarlige person er den udpegede økonomiske aktør med hovedsæde i EU, der er ansvarlig for overensstemmelsesobligationerne i forbindelse med det relevante produkt, der sælges til den Europæiske Union.

  • None
  • Kequ Technology s.r.o.
  • Pražákova 1008/69
  • Štýřice
  • Jihomoravský kraj
  • Brno
  • CZ
  • 63900
  • christopher25106@outlook.com
  • 420608214795