Color: Black/Red/Blue/White/Grey Type: Auto Remote Control Duplicator Material: Metal+Plastic Specifications: Working voltage: DC12V (27A battery is not including) Operating Current: 8mA Working frequency: 433MHz Modulation Mode: ASK (AM) The transmission power: 100mW Emission Distance: 100 m (proof) The encoding type: Self Copy The working temperature: -10 C to +50 C Works with the following remote control IC modules (please check your original remote control before ordering),and your remotes also should be Fixed code or Learning code. AX5326-3. PT2262. PT2260. EV1527. FP527. PT2242. HT600. HT680. HT6207. HT6010. HT6012. HT6014. AX5326 4. SMC918. PT2240. HT6013. HT6013. HT12D,etc Application: Garage doors, motorcycles, car alarm products, home security products, short-range wireless remote control products, industrial control products How to Program: Step 1 Delete the existing code of our remote duplicator 1)Click and Hold A and B buttons together - Led will flash 3 times 2)Keep holding A button and release B button 3)Keep holding A button and push B button 3 times, Led will start flashing Non-stop Now press any key on the remote control, LED lights are not bright, so delete code success; if you press the button LED lamp is lit, indicating that the original code is not deleted Step 2 - Clone your original remote 1)Put both remotes Into back to Back position. Make sure they have direct-contact 2)Click and hold 1 button on your original remote and 1 button on your clone remote. Keep holding until led will make 2 blinks then 3 blinks then goes into Steady and you have successfully cloned. ( the left keys follow the same above operation) If for some reason the clone does not go further then 2 blinks , it means the signal does not go through, please shift the remote slowly up and down until you get the point where it will go through. Package Contents: 1 x Remote Control Duplicator