Item Type: Encoder Material: Aluminum + Plastic Shaft Diameter: Approx. 6mm / 0.2in Working Voltage: 5-24V DC Comprehensive Speed: 3000-6000 rpm Maximum Corresponding Frequency: 30kHz Number of Pulses: 1000B/1024B Number of Phases: ABZ three-phase Cable Length: Approx. 144mm / 5.7in This product is small in size, light in weight, compact in structure, and easy to install. Features a flexible coupling connection and flexible connector to help prevent direct damage to the encoder. Suitable for use in precision working environments, office automation, and engineering applications. Compact design makes it easy to carry, store, and use, with reliable performance. The encoder is made of precision components; handle with care to avoid dropping. During installation, excessive eccentricity or misalignment may reduce service life. Do not use in environments with strong impact, vibration, corrosive substances, strong magnetic fields, high temperature, high humidity, or acidic/alkaline conditions. A pulse count error may occur when powering on or off. Allow a 0.5-second delay after power-on before operation. After installation, do not pull the cable with a force exceeding 29.4N. If installed near high-voltage or power lines, use a conduit to protect the cable. When wiring, avoid short-circuiting terminals and ensure correct connections. Incorrect wiring may damage the internal circuit. It is recommended to insulate unconnected terminals. Use grounded shielded wire for wiring. Do not disassemble the product. Package Includes: 1 x Encoder 3 x Screw 6 x Washer