3‑In‑1 Fat Burn Machine Weight Loss Machine EMS Far Infrared LED Body Shaping Device (Purple Button)EU Plug 100‑240V Condition: Item Type: EMS Machine Material: ABS Color: Purple key Instructions for use: Choosing the right skincare product is crucial before use, be sure e skin nutrition products before using this mode. Step 1. Clean skin before use. Step 2. Apply the toning product evenly on the skin (apply it to each part separately to prevent air drying and produce absorption effect) Step 3. Insert a slimming cosmetic device Step 4. Press the MODE key to open the device;Turn on the infrared. Step 5. Press the key once to turn on low strength (L), and press the key twice to turn on high strength (H). Low strength is used on the face;High strength can be applied to other parts of the body, such as arms and legs Step 6. Apply skin toner products (toning products) to the area you want to massage. Remember to keep your skin moist (note: gels are more conductive). Note: 1. You can press the function key to switch the toner mode without turning off the power 2. No matter which feature you're using.You can simply press the shutdown button to shut down the machine. 3. To make sure the machine is working properly, you can observe the spray by dropping a small amount of water on the metal detector surface.If there is water, it means that the machine is in normal functional state (excluding EMS and far-infrared functional mode). 4. The machine should be used under normal conditions. Remember to turn off the power supply and unplug the cable when you stop caring for the skin to avoid overheating caused by air vibration and prevent any possible combustion or shortening the service life of the product 5. The ideal time e this product is 5-15 minutes each time The machine has a built-in safety device.When her temperature reaches a certain limit, it will automatically lower the temperature whether you use it or not to ensure your safety. This machine has a built-in time control device.When your machine is in standby mode, it will automatically turn off the power whether it is in use or not.Restart the machine if you want e it again 8. Don't use the machine for more than 30 minutes. 9. Do not use this machine without applying any skin toner products. 10. Avoid using an area to move it over the skin for too long to avoid the focusing effect caused by wave energy.This effect may cause skin irritation or burning. 11. When using this machine, apply the metal detector to the skin completely.Incomplete contact can make a huge difference in impedance and lead to discomfort or skin burns. 12. After using the machine.Wipe the media off the metal, preferably with a soft cloth, to prevent any possible scratches. 13. Do not use water and any other chemicals, detergents or detergents to clean this product.This can lead to failures or shorten the product life cycle.