<p>I2COLED display module with needle and 8 dupon wires, you don't need to buy these accessories alone</p> <p>I2COLED display module applicable Raspberry\/\/STM32\/ Nano</p> <p>Performance is traditional LCD low energy consumption, no backlight, automatic lighting, high definition, thin and short, long panel service life</p> <p>Adopt very common I2C bus, simple wiring, the main chip : , Working voltage: DC3.3V~5.0V, Working temperature: -40~80 Resolution:128x32</p> <p>Please note:2 pcs I2COLED display module with needle and 8 dupon wires, you don't need to buy these accessories alone</p> <p>Easy installation, applicable to Raspberry\/\/STM32\/ JetsonNano and all the development boards DC 3.3v~5.0v</p> <p>Main parameters:</p> <p>Screen size :0.91(inch)</p> <p>Resolution :128 x32</p> <p>Pixel :128 x 32</p> <p>Support interfaces: I2C</p> <p>Drive chip: SSD1360</p> <p>Display colour: White</p> <p>Dimensions :38.0 X12.0X2.60(MM)</p> <p>Display area :22.384 X5.58(MM)</p> <p>Dot spacing :0.175 X0175(MM)</p> <p>Dot Size :0.159 X0.159(MM)</p> <p>Foot number :4 GND VCC SDA stitches</p> <p>Working voltage: V-5V 3.3</p> <p>View Direction: Full View</p> <p>Working temperature :-40~80</p> <p>Storage temperature :-40~80</p> <p>Color: as shown</p> <p>Material: Plastic + Metal</p> <p>Package Contents:</p> <p>2 x I2COLED display module</p> <p>8 x dupon wires</p> <p>Only the above package content, other products are not included.</p> <p>Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +\/- 1-3cm.</p>