2Pcs BTS7960 43A High Power Motor Driver Module Smart Car Driver Module for Current Limit

109,00 DKK
+ 62,49 DKK Levering
  • product image
  • product image
  • product image
  • product image
  • product image

2Pcs BTS7960 43A High Power Motor Driver Module Smart Car Driver Module for Current Limit

  • Brand: Unbranded
Sоlgt af:

2Pcs BTS7960 43A High Power Motor Driver Module Smart Car Driver Module for Current Limit

  • Brand: Unbranded
RRP: 279,00 DKK
Pris: 109,00 DKK
Du sparer: 170,00 DKK (60%)
Sоlgt af:
109,00 DKK
+ 62,49 DKK Levering

På lager

Vi accepterer følgende betalingsmetoder

Beskrivelse

This driver uses chips BTS7960 composed of high-power drive full H-bridge driver module with thermal over-current protection. Double BTS7960 H-bridge driver circuit, with a strong drive and , effectively isolating the microcontroller and motor driver! High-current 43A Double BTS7960 large current (43 A) H bridge driver; 5V isolate with MCU, and effectively protect MCU; 5V power indicator on board; voltage indication of motor driver output end;can solder heat sink;<br><br>PIN Definition: 1. RPWM: Right Turn PWM 2. LPWM: Left Turn PWM 3. R_EN: Right Turn Enable (High Active) 4. L_EN: Left Turn Enable (High Active) 5. R_IS: Right Turn Current Warning (May Leave Floating) 6. L_IS: Left Turn Current Warning (May Leave Floating) 7. VCC: (5V) 8. GND Connections: Method 1: VCC: 5V from Microcontroller(MCU) GND: GND from Microcontroller(MCU) L_PWM: PWM or 5V from Microcontroller(MCU) for CCW(CW) Turns R_PWM: PWM or 5V from Microcontroller(MCU) for CW(CCW) Turns R_EN and L_EN: 5V from Microcontroller(MCU) Method 2: VCC: 5V from Microcontroller(MCU) GND: GND from Microcontroller(MCU) L_PWM: 5V from Microcontroller(MCU) for CCW(CW) Turns R_PWM: 5V from Microcontroller(MCU) for CW(CCW) Turns R_EN and L_EN: PWM from Microcontroller(MCU) Just need four lines from MCU to driver module (GND. 5V. PWM1. PWM2); isolation chip 5 V power supply (can share with MCU 5 V); to reverse the motor forward, two PWM input frequency up to 25kHZ; two heat flow passing through an error signal output; isolated chip 5V power supply (can be shared with the MCU 5V), can also use the on-board 5V supply; the supply voltage 5.5V to 27V; Colour:blue+black Material:PCB Size:4 x 5 x 1.2cm<br><br>Package Contents: 2 x BTS7960B H-bridge 43A High-Power Motor Driver Module<br><br>Only the above package conten
  • Fruugo ID: 417885703-881228470
  • EAN: 6921465371969

Levering og returnering

Sendt inden for 2 dage

  • STANDARD: 62,49 DKK - Levering mellem kl fre. 10 oktober 2025–fre. 17 oktober 2025

Afsendes fra Kina.

Vi gør vores bedste for at sikre, at de produkter, du bestiller, leveres til dig fuldt ud og i henhold til dine specifikationer. Skulle du dog modtage en ufuldstændig ordre eller andre ting end dem, du bestilte, eller der er en anden grund til, at du ikke er tilfreds med ordren, kan du returnere ordren eller produkter inkluderet i ordren og modtage en fuld refusion for varerne. Se fuld returpolitik

Detaljer om produktoverholdelse

Se venligst overensstemmelsesoplysningerne, der er specifikke for dette produkt, beskrevet nedenfor.

Følgende oplysninger leveres af den uafhængige tredjepartsforhandler, der sælger dette produkt.

Producent:
De følgende oplysninger angiver kontaktoplysningerne for producenten af det relevante produkt, der sælges på Fruugo.

  • Therobe Store 2
  • Dongguan Lifeng Filter Trading Co., Ltd.
  • No. 31, Dongxia 8th Alley, Building 1, Room 602
  • Dongguan
  • CN
  • 523901
  • gserghe5566@163.com
  • 18506810445

Ansvarlig person i EU:
De følgende oplysninger angiver kontaktoplysningerne for den ansvarlige person i EU. Den ansvarlige person er den udpegede økonomiske aktør med hovedsæde i EU, der er ansvarlig for overensstemmelsesobligationerne i forbindelse med det relevante produkt, der sælges til den Europæiske Union.

  • Prolinx GmbH
  • Prolinx GmbH
  • Brehmstr.56,Duesseldorf,Germany
  • Duesseldorf
  • DE
  • 40225
  • eu@eulinx.eu
  • 2113105498