360 Degree Adjustable: Kalolary 360 Drip Irrigation Emitters 8-hole full-circle spray pattern, adjustable flow rate irrigation drippers, you can adjust the amount of water by rotating the outer cap to openor block the holes, thus saving water resources and money.Design: 0-70 L/H adjustable flow - 1/4 (4-7mm) adjustment Drip irrigation hose - professional quality drippers for drip irrigation. The stake dripper comes with an additional connector to attachthe 1/4" drip tube Can be used for all terrains. Be sure to put the connected part in 70~80 water for 10 seconds before assembling it. Once cooled the tube will remain tight.High QualityMade of quality material. Lightweight, anti acid and alkali, anti corrosive, low temperature resistant, odorless. The bottom of the dripper is sharp and easy to insert into the ground. Durable and long service life in the ground.Wide Use: The drip irrigation emitters can be used in low pressure situation. Suitable for pots, tubs, ground cover, landscape gardens, flower beds, vegetable gardens, greenhouse, orchard, lawn,self-planting, watering herb gardens, etc.Kalolary ServiceIf you are not completely satisfied with your irrigation system drippers, 24 hour customer service, we will offer you a free replacement or refund. Please enjoy your shopping.Features:The dripper has 8 outlets to emit 8 jets of water for balanced watering.360 degree adjustable water flow irrigation drippers. Each drip head has an adjustable cap that allows for simultaneous control of flow rate and wetting area. Every drop can be removed for cleaning.With a pointed stake, no other support is needed. Simply insert it into the dirt after connecting it to the drip irrigation tube.Specification:Spray radius: 0-50cmMaterial: PPLength: approx. 13cm / 5.1inchSuitable for 4mm/7mm (inner/outer diameter) tubePackage Included: About 100 x Drip Irrigation System Watering StakesWarm Tips:1.The transmitter connector is specially designed for a firm connection to the pipe. It may take strength and methods to attach them.We recommend that you either soften the pipe beforehand with very hot water or enlarge the opening of the tube with suitable tools.2.Please allow 1-5mm error due to manual measurement.3.The product may cause odor in the packaging for a long time. Please open and put back the air convection in 1-2 days. The smell will disappear normally.