100Pcs Thread Inserts Male Female Reducing Nut Repair Tool Stainless Steel Fastener M4x0.72D 2025

17,95 DKK
+ 53,99 DKK Levering

100Pcs Thread Inserts Male Female Reducing Nut Repair Tool Stainless Steel Fastener M4x0.72D 2025

  • Brand: Unbranded
Sоlgt af:

100Pcs Thread Inserts Male Female Reducing Nut Repair Tool Stainless Steel Fastener M4x0.72D 2025

  • Brand: Unbranded

17,95 DKK

Spar 18,00 DKK (50%)

Vejl. Pris

35,95 DKK
På lager
+ 53,99 DKK Levering
Sоlgt af:

17,95 DKK

Spar 18,00 DKK (50%)

Vejl. Pris

35,95 DKK
På lager
+ 53,99 DKK Levering

Vi accepterer følgende betalingsmetoder

Beskrivelse

Item Type: Thread Inserts Material: SUS304 Model: M4x0.7 Thread Specification: M4x0.7 (mm) Outside Diameter Before Installation: Approx. 5 ~ 5.3mm / 0.2 ~ 0.2in Diameter of Drilling Drill Bit for Installation: Approx. 4.2mm / 0.2in 1D/1.5D/2D/2.5D/3D: Length After Installation: Approx. 4mm / 0.2in 6mm / 0.2in 8mm / 0.3in 10mm / 0.4in 12mm / 0.5in Number of Turns Before Installation: 4/6.6/9.1/11.7/14.2 Thread Protective Sleeve Model Specification Description: For Example: M3x0.5X1.5D, which means that after the screw set is completed, the female thread is M3, the pitch is 0.5, and the length is 1.5D (length refers to 1.5 times the diameter, that is, 1.5x3=4.5mm ), the length here refers to the length after installation. How to Use: 1. Drilling Use the drill bit of the size listed in the parameter table of the wire thread insert to drill the hole. Be careful not to drill the hole into a cone shape. The chips generated by the drill hole must be blown out with compressed air. After drilling, the counterbore should not exceed the depth of 0.4 pitch. Too large counterbore is not conducive to the screwing of the wire thread insert. 2. Tapping Use special taps for wire thread inserts to tap. The depth of the tapping must exceed the installation length of the thread inserts. After tapping, use a compressed air spray gun to blow out the debris. When the thread accuracy is high, check the tapped bottom hole with a special bottom hole plug gauge for wire thread inserts. 3. Installation Put the wire screw sleeve into the installation wrench (figure 5 on the right), insert the wire screw sleeve installation tail handle into the guide rod groove of the installation wrench, and turn the handle of the installation wrench to screw the wire screw sleeve into the screw hole. For installation of M14x2 or more phase thread thread inserts, you can use the "T" type slotting simple tool to install; Note: During the installation and screwing process of the thread inserts, there should be no pressing in the vertical direction to prevent jumping teeth. The correct method is slowly screw in the direction of thread rotation. 4. Remove the handle (break off the mounting handle) Use a breaker to break the mounting handle. Use about 200g of coconut to hit the breaker instantly, and the handle can be removed. Do not use the mounting wrench to rotate in the opposite direction. Do not break the mounting handle. This situation is very easy. As a result, the tail shank was broken and the wire was pulled out. 5. Unscrew When installation problems occur during the installation of the wire thread insert (such as jumping teeth), the thread insert needs to be removed, and a special sleeve remover should be used to remove the wire thread insert. Note: Due to the light and screen setting difference, the item's color may be slightly different from the pictures. Please allow slight dimension difference due to different manual measurement.
  • Fruugo ID: 420348220-885722459
  • EAN: 6134938124010

Produktsikkerhedsinformation

Se venligst produktsikkerhedsoplysningerne, der er specifikke for dette produkt, beskrevet nedenfor

Følgende oplysninger leveres af den uafhængige tredjepartsforhandler, der sælger dette produkt.

Produktsikkerhedsmærker

CE Mark
Sikkerhedsadvarsler: Not suitable for children under 36 months
Ingredienser: Others

Levering og returnering

Sendes inden for 24 timer

  • STANDARD: 53,99 DKK - Levering mellem kl man. 03 november 2025–tir. 11 november 2025

Afsendes fra Kina.

Vi gør vores bedste for at sikre, at de produkter, du bestiller, leveres til dig fuldt ud og i henhold til dine specifikationer. Skulle du dog modtage en ufuldstændig ordre eller andre ting end dem, du bestilte, eller der er en anden grund til, at du ikke er tilfreds med ordren, kan du returnere ordren eller produkter inkluderet i ordren og modtage en fuld refusion for varerne. Se fuld returpolitik

Detaljer om produktoverholdelse

Se venligst overensstemmelsesoplysningerne, der er specifikke for dette produkt, beskrevet nedenfor.

Følgende oplysninger leveres af den uafhængige tredjepartsforhandler, der sælger dette produkt.

Producent:
De følgende oplysninger angiver kontaktoplysningerne for producenten af det relevante produkt, der sælges på Fruugo.

  • Lumina
  • Tidieyi (guangdong) kejiyouxiangongsi
  • Room 701, No. 11, Daling North Street, Baiyun District, Guangzhou
  • Guangzhou
  • China
  • 510000
  • a13451118931@qq.com
  • 86-13451118931

Ansvarlig person i EU:
De følgende oplysninger angiver kontaktoplysningerne for den ansvarlige person i EU. Den ansvarlige person er den udpegede økonomiske aktør med hovedsæde i EU, der er ansvarlig for overensstemmelsesobligationerne i forbindelse med det relevante produkt, der sælges til den Europæiske Union.

  • WeTapeV Euro s.r.o.
  • WeTapeV Euro s.r.o.
  • Na Provaznici 2063/3, Smichov, 150 00 Praha, Czech Republic
  • Praha
  • Czech Republic
  • 150 00
  • info@wetapeveuro.com
  • 420774336505