1、10 Ports: The PoE switch provides 10 RJ45 ports with 10M and 100M self adaptation, and ports 1 to 8 have PoE power supply function, which can be used as power over Ethernet devices, 8 Fast Ethernet PoE ports and 2 Fast Ethernet ports. 2、Automatic Detection: All ports can automatically detect and identify the powered devices that conform to the IEEE 802.3at, af standard, and supply power to them through the network cable. Support ordinary switch, 250M transmission and other two modes. 3、Energy Saving: PoE Ethernet switches execute with IEEE802.3az Energy Efficient Ethernet Mode, designed to optimize power consumption and reduce costs. 4、Fanless Design: The compact fanless design of the Ethernet port interface and the compact, lightweight, and robust metal housing design are suitable for use in quiet locations. 5、Scope of Application: The Ethernet splitter can adapt to various workplaces and different temperatures. Perfect for routers, NVR connections, IP cameras, wired surveillance cameras, VoIP phones, wireless access points and more network devices. Item Type: 10 Port PoE Switch Material: Aluminum Alloy Basic Skills: 1. IEEE 802.3 Ethernet and IEEE802.3u Fast Ethernet Protocol Standards 2. Compatible with IEEE 802.3at, af Standard Powered Device (PD) 3. Compatible with Certified Nonstandard Powered Devices (PD) 4. Store and Forward 5. Automatic Learning and Aging 6. IEEE802.3X Full Duplex Fluid Control and Backpressure Half Duplex Fluid Control Ports: 8 100M POE, 2 100M Cascading RJ45 Store and Forward: Support Exchange Content: 2G MAC Address Table: 2K Use Environment: Working Temperature: 0℃ to 40℃ Storage Temperature: -40℃ to 70℃ Working Humidity: 10% to 90% RH Non Condensing Storage Humidity: 5% to 90% RH Non Condensing POE Standard: 1. Standard IEEE802.3af, at Single Port Maximum Power 30W, the Whole Machine Maximum Power 120W 2. Support Overcurrent, Overvoltage, Short Circuit Full Protection 3. Support High Power PD Soft Start 4. Support Sequential Boot 5. Support Certified Nonstandard PD Power Receiving Supported Standards and Protocols: 1. IEEE 802.3 Ethernet Media Access Control Protocol 2. IEEE 802.3i 10BASE T Ethernet 3. IEEE 802.3u 100BASE TX Fast Ethernet 4. IEEE 802.3af Power Ethernet Devices Through Ethernet Data Line Pairs or Devices 5. IEEE 802.3at Realizes High Power Power Supply for Ethernet Equipment Through Ethernet Data Line Pairs or Equipment 6. IEEE 802.3x Fluid Control Default System Mode: Ordinary Switch, VLAN Isolation, 250M Transmission Data Transmission Rate: Ethernet 10Mbps Half Duplex, 20Mbps Full Duplex, Fast Ethernet 100Mbps Half Duplex, 200Mbps Full Duplex Network Medium: 10Base T: 2 to 3 (Cat3) or Above UTP, STP (≤100m) 100Base TX: 2 Pairs of Category 5 (Cat5) or Above UTP, STP (≤100m) 10Base TX: 2 Pairs of Category 5 (Cat6) or Above UTP, STP (≤250m) 1 x Switch 1 x Power Cord 1 x User Manual