Auto detection of K-Line/CAN, with option to bypass and force preferred communication protocol. Temporary immobilizer bypass to enable bench flashing on ME7 systems. Boot mode support for ECUs with C167 and ST10 processors. EEPROM read/write functions available for select ECUs. TPROT level checking for MEDC17 without ECU disassembly. System Requirements: 1. Install on Windows 7 system. 2. Proper driver installation is required before launching software; failure to do so may prevent software from opening. Use only the driver provided on the included CDdo not use drivers intended for other MPPS versions. This module enables advanced functionality for a range of ECUs, including but not limited to M3.8, M5.9, ME7xx, MED9, MED17, EDC15/16/17, Delco, Trionic, and others. Supported Interfaces: - 6JF: Full Read/Write microcontroller and EEPROM via K-line - 8DF: Full Read/Write microcontroller and EEPROM via K-line - 8F2: Full Read/Write microcontroller and EEPROM via K-line and CAN - 8F3: Full Read/Write microcontroller and EEPROM via K-line and CAN - 8GM: Full Read/Write microcontroller and EEPROM via CAN - 8GS: Full Read/Write microcontroller and EEPROM via CAN - 5SF3: Full Read/Write Flash and EEPROM via CAN - 5SF3: Full Read/Write EEPROM via K-Line - 5SF8: Full Read/Write Flash and EEPROM via K-line and CAN - 5SF9: Full Read/Write Flash and EEPROM via CAN Material: ABS plastic Color: Black Package Contents: 1 x MPPS V18.12.3.8 1 x Breakout Tricore Cable 1 x Connection Cable 1 x CD Note: The package includes only the items listed above. Other accessories shown are not included. Lighting and display differences may cause slight variations in color representation between image and actual product. Measurement tolerance: 13 cm.